1) Place the prepared lightweight wall panel at the designated installation location and then stand it up.
2) Point to a specific location along the joist line, then use a shovel to gently lift the lightweight wall panel from below. This ensures the two boards are securely fastened together with no gaps. During this process, use a hammer to firmly press the panels together, and apply the pre-mixed cement at the joints between the boards. Ensure that no gaps are visible.
3) Drive wooden wedges into the wedges to temporarily stabilize them, and the basic work is essentially done.
The lightweight partition boards go by various names, such as New-Type Lightweight Partition Boards, Lightweight Cement Foam Partition Boards, or New-Type Composite Partition Boards. These partition boards are reusable due to their special materials, allowing them to be cut to any size to meet specific needs, thereby satisfying the primary demands of consumers.
Note that light-weight partition boards must be properly stored before construction.
1. Ensure the storage warehouse environment is cool and dry. This utility model is suitable for regions with heavy rainfall and high humidity during the rainy season. To prevent moisture absorption and warping, the storage should be sealed to avoid affecting the basic function of the lightweight partition board.
2. Avoid prolonged exposure to the sun. The remaining lightweight partition boards can be stored in the warehouse, or covered with shade during construction site activities. Office buildings can use ALC panels, or cover them with a tarp.
3. In the warehouse storage room, maintain order and uniformity; install the office building ALC panels, and categorize and arrange them properly. Otherwise, it may lead to warping and deformation of the panels, affecting their flatness. Storage is typically done by stacking, with each stack generally reaching 2-3 meters high depending on the product type. Additionally, use flame-retardant partitions to separate flammable decorative building materials within the storage room to prevent rapid spread in case of a fire.
Ensure the partition boards are sealed properly if stored for extended periods to prevent any reactions over time that may damage them.
5. After selecting the address, avoid frequently moving lightweight partition walls.
