Autoclaved Aerated Concrete Panels - Foshan Zhonglian Optimal Technology Co., Ltd. specializes in the production of ALC panels.

Installation Tips for ALC Partition Panels

1. Inspected that the partition dimensions meet the standard requirements.

2. According to the layout, secure the 40×50×90L iron piece in the designated fixed positions.

Step 3: Install from one side based on the layout. If there are windows and doors on the partition, start the installation from both sides of the openings. Align with the chalk line, use a lever to gently撬动 at the bottom, keep the top tight, the edge of the board tight, and wedge wooden blocks at the bottom for reinforcement.

During the installation process, promptly check for flatness, plumbness, and other relevant inspection items.

5. The installation of water and electricity conduits should be concurrent with the mounting of partition panels. When it is necessary to drill holes in the partition panel, pre-drill before installation, with the hole size not exceeding 80mm x 80mm; the weight of plumbing accessories should not exceed 80kg. Any hanging items over 80kg should be installed on the fixed pre-buried components of the partition.

All sides of electrical wiring switches and outlets should be smoothed with filler material.

After the installation of the alc partition boards is complete, the adhesive materials must dry before proceeding to the next step. Decorative work can be initiated within 10-15 days from the date of normal installation.

8. The surface of the installed partition should be free of peeling, chipping, hollowing, and cracking. Calculate the flat area of each wall to achieve the middle plastering of the building.

Vapor-Pressed Aerated Concrete Panels - Foshan Zhenlian Optimal Technology Co., Ltd. is a specialized manufacturer of ALC panels.

alc boards are a type of panel used in the construction industry, with their dielectric strength being particularly important. In colder regions, where natural environmental regulations are not stringent, acoustic absorption materials are applied in the natural environment to ensure room temperature. They offer excellent soundproofing. Buildings in each region are quite concentrated. Bus stations or shopping centers have high noise regulations. Without various forms of soundproofing, everyone can hear. They provide good soundproofing, both preventing noise and allowing for a quiet surface for real people.

During the construction process, issues such as cracks may arise, which can significantly affect the entire wall. How can the cracking phenomenon of ALC panels be prevented?

Improving the production quality of aluminum alloy wall panels is crucial for their normal operation. Manufacturers should refine production processes, select high-quality materials, and ensure reasonable material ratios to produce panels with enhanced strength.

2. Choosing the right joint material is a crucial factor affecting construction quality. Therefore, it is advisable to use high-strength joint materials and replace cement with mortar to fill in the joints to prevent direct cracks from forming at the joint area.

During construction, walls are typically separated by different units and should be kept at an appropriate distance to reduce the shrinkage stress on the walls. This helps prevent cracks in the construction area, such as at holes made in the site or in the four major crack lines, which are prone to cracking. At the joint locations of the walls, where it is easy to open them up, appropriate measures should be taken to prevent cracks and their propagation. Efforts should be made during construction to prevent wall cracking.

Autoclaved Aerated Concrete Panels - Foshan Zhonglian Optimal Technology Co., Ltd. is a specialized manufacturer of ALC panels.

Autoclaved aerated concrete blocks, also known as aerated bricks, gas bricks, or foam bricks, are a general term. They are categorized into autoclaved (sand) aerated concrete blocks and autoclaved (limestone) aerated concrete blocks. Sand aerated boards are abbreviated as aerated sand blocks or sand aerated blocks. Autoclaved (limestone) aerated concrete blocks are abbreviated as limestone aerated blocks or lime aerated blocks. They differ from traditional fly ash aerated concrete blocks, with the characteristics of sand aerated boards:

1. Raw Material Upgrade

The sand-lime concrete blocks use quartz sand instead of fly ash as the silicon material, not only enhancing the blocks' strength but also achieving significant improvements in water resistance, drying shrinkage, and γ-ray irradiation resistance.

2. Industrial Products

The products manufactured by the computer-controlled automatic production line for aerated concrete blocks have precise measurements with minimal error, ensuring a relatively guaranteed quality. The industrial plant can achieve a high-efficiency dry operation.

3. Post-Wall Treatment

The aerated concrete blocks feature precise dimensions, requiring adhesive rather than mortar for assembly, with only 2-3mm mortar joints. The walls cannot be painted and must be treated with putty, fundamentally resolving the issue of cracking in painted aerated blocks.

4. Versatile and diverse application components

The finished sand aerated concrete blocks can be used as panels or blocks. The plates can also be surface decorated. External decoration can be completed with a spray paint. They have a wide range of applications and comprehensive functions.