- AllProduct Category
-
High Voltage Isolation Disconnect Series
High-Voltage Silicon Rectifier Transformer Series
High-Voltage Power Series
High Voltage Isolation Switch Box Series
Electrostatic Dust Removal Controller
Dust Collector Series
Insulating Porcelain Components
Top Drive Side Impact Device
Cathode Ray Series
Pneumatic Conveying System
Dust Collector Additional Parts


详情描述
GGaj04 Series High-Voltage Silicon Rectifier Transformer

Product Advantages
Utilizing dual火花 detection and control technology with both hardware and software.
Automatically and rapidly generate a series of dynamic voltage-current curves for electric fields.
Capture and store voltage and current waveforms.
Features power reduction impact control function;
Features anti-corona control function;
Robust network system control, forming a powerful subsystem.
The human-machine interface is user-friendly.
Multiple control methods
Spark Trace Control
Average voltage control
Spark Rate Setting Control
Critical Spark Control
Dual Half-Wave Intermittent Power Supply Control
Single half-wave intermittent power supply control.
Special protective features
Overcurrent protection
Overload short-circuit protection
Open Circuit Protection
Hazardous Oil Temperature Protection
SCR Short Circuit Protection
Overexcitation protection
Under-voltage protection
Features special overvoltage voltage limiting and overcurrent limiting measures.
Product Features
The operating temperature for transformers should not exceed +40°C and should not be lower than the freezing point specified for transformer oil.
2. Relative humidity of air shall not exceed 90% (when air temperature is 20±5℃).
3. There should be no conductive dust or gases containing corrosive metals or insulating materials present around the equipment.
4. Explosive hazard-free in accordance with the following specifications: sine wave pattern, frequency of 50Hz, fluctuation range not exceeding ±2%, voltage of 380V, amplitude variation not exceeding ±55, and instantaneous fluctuation range not exceeding ±10%.
5. The dust collector's grounding resistance value is less than 2Ω.
询价单












