Why Do Spiral Blades Show Spillage During Transportation?

Why Spiral Blades May Scatter During Transportation

Reason for Material Spillage During the Transportation of Spiral Blades:

The auger blades scatter material when they drift off course.

Screw blade ends may exhibit a high-low variation during operation, causing material to spill out from the lower side.

2. Transfer points are sprinkled with seeds.

转载点撒料 mainly occurs at the feed hopper, conveyor troughs, etc. If the conveying machine is severely overloaded, it can lead to the damage of the rubber skirt plate of the conveyor trough, with the steel plate design being too far from the belt.

The longer the gasket board, the more likely it is for material to overflow from the chute.

3. The spiral blade of the凹段绞龙 is suspended.

When the sagging arc radius is small, there may be an occurrence of floating. At this point, the screw blade has now left the trough roller assembly, and the angle of the groove decreases, which could potentially cause some material to spill out.