Automatic Dual-Head Single-Side Heat Shrink Soldering Machine

Automatic Dual-Head Single-Roll Tube Coating Machine

Specs and Parameters

Function: Wire cutting, single-end stripping, double-end stripping, double-end pressing, single-end pressing and preheated sheath application

Peel Length/Pressing Position/Blade Depth adjustable

Processed Wire #22 - #14 AWG

Processing Capacity: 80-100mm line length, approximately 2,000 pieces per hour; special wire material (ultra-fine soft wire) about 1,800 pieces per hour.

Cutting Accuracy: Below 100mm line length, error is 0.2 + (line length x 0.002)

Over 100mm line length, error of 0.5 + (line length x 0.002)

Processing Length: 86mm - 99999mm, with rubber in the middle

剥皮长度      Front End 0.5~8.0mm   Rear End 0.1~10.0mm

Cutting Depth Large Adjustment: 5.50mm, Resolution: 0.01mm

Detection Device   Low Pressure   Wire Condition   Abnormal Compression   Input Line Anomaly

Power: Single-phase AC 200V~242V, 50/60Hz, 10A

Compressed Air  0.5 MPa (5 kgf/cm²) Clean and Dry Gas

Mechanical Dimensions: W 800 * D 1400 * H 1800 mm

Machine Weight: Approximately 500 kg

Main Configuration:

1 Sport Control Card

2 Sensor Taiwan Gelin

3 Stepping Motor Control System (12 Sets) Jusen

4 Stepping Motor Driver for Control Systems (12 Sets) Servo Electronics

5 Touchscreen Bu Ke

6 Cylinder Taiwan Airtac

7 Electromagnetic Valve EM.C

8 Belt European Special

10 Slider Track Taiwan Aibos

Feature Description:

1》设备构成主要采用台湾、日本品牌原件，完成切断电线、剥皮、端子压着等功能、性能稳定。

2) Equipped with a built-in four-wheel synchronous wire feeder to maintain constant wire tension; comes with an automatic cutting device for terminal strips.

3) Host motion control card control, bilingual touchscreen parameter setting, short adjustment time, easy operation.

4) Suitable for horizontal and vertical OTP terminal mold.

5) Energy-efficient, space-saving, and eco-friendly equipment.