Large Diameter Hoses

1. Structure: The conveyor belt is composed of an inner rubber layer, multiple layers of fabric reinforcement, and an outer rubber layer. The braided suction hose is composed of an inner rubber layer, multiple braided fabric layers, a spiral steel wire reinforcing layer, and an outer rubber layer. Section II: Features: The rubber hose boasts excellent properties such as small outer diameter tolerance, oil and heat resistance, lightness, softness, and durability; the burst pressure of the rubber hose is four times the working pressure. Section 3: Application: Various types of reinforced rubber hoses (or suction) are manufactured using appropriate materials based on the conveying medium. These products have a reasonable structure design, excellent quality, and are sturdy and durable. They are flexible hoses used for conveying, suction (under vacuum conditions), various liquid粘流体, and powdered solid materials. Section 4: Technical Parameters of General Fabric Reinforced Hoses

ID (mm) Working Pressure (Mpa) Burst Pressure (Mpa) Hose Length Nominal Size Tolerance Size (m) Tolerance (mm) 130 0.5 0.7 1.0 2.0 2.8 4.0 0.2 200 160 0.5 0.7 1.0 2.0 2.8 4.0 0.2 200 190 0.5 0.7 1.0 2.0 2.8 4.0 0.2 200 250 0.5 0.7 1.0 2.0 2.8 4.0 0.2 200 321 1.2 0.3 0.5 0.7 1.2 2.0 2.8 200 381 1.2 0.3 0.5 0.7 1.2 2.0 2.8 200 511 1.2 0.3 0.5 0.7 1.2 2.0 2.8 200 641 1.5 0.3 0.5 0.7 1.2 2.0 2.8 200 761 1.5 0.3 0.5 0.7 1.2 2.0 2.8 200

Attract Hose Specifications:

ID (mm) Number of Plies Spiral Wire Diameter (mm) Pipe Fitting Length (mm) Hose Length Nominal Size Tolerance Size Tolerance Size (m) Tolerance (mm) 38 1.2 32.07 5 10 15 0.51 11.23 42.61 100 15 10 150 6.4 1.53 42.61 100 15 10 150 7.6 1.54 52.61 100 15 10 150 8.9 1.54 53.21 100 15 10 150 10 22.04 53.21 2.52 5.0 20 10 150 15 22.05 64.0 15 0 20 10 150 20 32.56 75.0 20 25 10 150 25 42.57 85.0 20 25 10 150 30 52.57 85.0 25 25 10 150

1. Water Transfer Hose: Suitable for general water conveyance, used in temperatures ranging from -20℃ to 45℃. 2. Air Hose: Suitable for conveying compressed air and inert gases, usable in temperatures ranging from -20℃ to 45℃. 3. Oil Resistant Hoses: Suitable for conveying conventional crude oil, usable in temperatures ranging from -20℃ to 45℃. 4. Heat Resistant Hose: Suitable for transporting water at temperatures below 100°C. 5. Acid and alkali-resistant hose: For conveying solutions of dilute acids and alkalis with concentrations below 40%, suitable for use in environments ranging from -20℃ to 45℃. 6. Sandblasting Hose: Suitable for metal surfaces for pressure sandblasting rust removal and polishing. 7. Drain and vent oil-resistant hoses: Operating pressure 1.0-1.5 MPa (4x safety factor)

5. Special Performance Hoses: Properties and Applications of Special Rubber Hoses

Steam Hose, Inner Diameter (mm): 6-76, Used for transporting saturated steam or superheated water at temperatures below 170°C, working pressure: steam 0.35MPa, hot water 0.8MPa. Oil & Grease Hose, Inner Diameter (mm): 6-152, For suction and delivery of gasoline, motor oil, lubricating oil, and other mineral oils at normal temperature. Working pressure: 0.5-1.2MPa; also available with external armor. Food Grade Hose, Inner Diameter (mm): 16-152, For suction of milk, wine, edible oils, and liquid beverages. Working pressure: 0.5-0.8MPa. Acid & Alkali Hose, Inner Diameter (mm): 19-203, For transporting dilute acid and alkali solutions at normal temperature. Working pressure: 0.5-0.7MPa; inner lining of butyl rubber available for concentrated acids, glass fiber abrasive-resistant hose layer. Abrasive Blasting Hose, Inner Diameter (mm): 19-76, For wind pressure blasting, working pressure: 0.6MPa. CEMENT TRUCK TUBING can also be produced according to this specification. Water Tank Elbow, Inner Diameter (mm): 25-102, For water delivery in locomotive water tanks. Drilling Hose, Inner Diameter (mm): 51-102, Pressure, wear, and oil-resistant, used for flexible connections between drilling rig swivel pipes and vertical pipe flanges. Working pressure: 10-30MPa; both ends with metal fittings and nylon line wrapping. Oxygen Blowing Hose, Inner Diameter (mm): 51-127, Flexible connecting tube for pure oxygen top-blowing converter, working pressure: 1.5MPa; also available with steel wire braided and crimped, working pressure up to 8MPa. Both ends with sulfurized metal flanges and asbestos protective layer. Sludge Discharge Hose, Inner Diameter (mm): 196-900, For dredging ships to discharge (suction) mud sands, working pressure: 0.4-0.5MPa; flanged joints available as per design requirements. Hole Drilling Hose, Inner Diameter (mm): 25, 32, 40, For bridge, highway, and other civil engineering hole drilling. Tensile strength: 1.5-2.30Kg/root. Outer rubber layer has excellent tear resistance.