The Wide Application and Maintenance of Rubber Vulcanizing Machines

The rubber curing machine is widely used in on-site bonding and conveying joints for gold processing, chemical industry, metal mines, power plants, and port terminals. The tensile strength of the cured rubber is not less than 90% of the original belt. The joint belt is smooth. The maintenance and operation of the belt curing machine can reduce the wear of the drums and extend the service life of the conveyor belts and rubber conveyor belts. The curing speed can be used to judge the faults of the belt curing machine. Sometimes, the curing speed may be slower when using the belt curing machine equipment. It might be instinctively thought that there is a problem with the equipment of the belt curing machine. In fact, it is not the case.

The vulcanization time of a rubber curing machine is a crucial factor affecting the vulcanization effect of a four-column belt vulcanizer. If the time is too short, the vulcanization degree is insufficient; if it's too long, the vulcanization degree is too high. If the curing temperature exceeds 10 degrees Celsius, the curing time will extend by approximately half. The higher the sulfur content, the faster the vulcanization rate and the higher the vulcanization degree. Sulfur has a limited solubility in rubber, and an appropriate amount of sulfur precipitates from the rubber surface.

The belt vulcanizing machine's beam is made of high-strength, high-plasticity aluminum alloy, and the heating plate is made of high-purity, high-conductivity aluminum alloy. The overall size is compact, with a uniform surface temperature of the heating plate. The hydraulic press plate is powered by an electric or manual pump and comes with a precise digital display automatic electronic control box. The connection between the electric control box and the main unit is a one-piece plug-in multi-core cable, offering convenient operation and reliable performance. It boasts fast heating speed, uniform temperature, and high thermal efficiency. It is an ideal bonding equipment for conveyor belt joints. The quality of the belt joints directly affects the service life, work efficiency, and economic benefits of the belt.

Tape Sulfurizing Machine Maintenance:

(1) Prior to use, check the insulation resistance of the hot plate. If it's too low, heat and dry it until the insulation value is less than 50 mpa.

Please handle and transport items with care, practicing civilized operation.

Field operations should implement reliable rain and waterproof measures to prevent water intrusion and dampness.

After heavy use, the item should be stored in a warehouse with relative humidity not exceeding 85% and protected from rain. Pillow placement below the warehouse is strictly prohibited on the ground.