Eight Proper Procedures for Operating a Glass-Lined Reactor Tank

Glass-lined reactor, as an expensive industrial equipment, proper operation methods and daily maintenance are essential. Only through correct operation can its value be realized, and through maintenance, its lifespan can be extended. What else do we need to do? The editor will guide you through eight proper methods of operating glass-lined reactors.

Before using the glass-lined reaction tank, it's crucial to check if the pipes and valves meet the feeding conditions. If they don't, feeding is not allowed. Only when the conditions are met can the tank be used. This is a common-sense issue, so please don't violate it, okay!

2. Daily inspections primarily involve checking the reducer, mixer motor, and mechanical seals, focusing on their normal operation and the absence of any anomalies. Additionally, special attention is given to ensuring the reducer's oil level is appropriate and that the cooling water supply for the mechanical seals is functioning normally.

Before adding materials, check for any abnormalities. Add the required amount according to regulations, and only proceed with the start-up once everything is in order.

4. When using glass-lined reactors, strictly adhere to the correct operational procedures. Additionally, closely monitor the temperature and pressure within the reactor. Absolutely no over-temperature or over-pressure operation is permitted!

5. During the operation of the glass-lined reaction tank, routine inspections are required to ensure timely detection and resolution of any issues.

If an overheating phenomenon is detected, the correct solution is to use water to cool it down. The equipment should only be used again once the temperature has dropped to meet the process requirements.

7. Some glass-lined reactors may experience overpressure, in which case the relief valve should be immediately opened to release pressure urgently.

8. In the event of an unexpected halt in operations, such as a power outage, immediate cessation of material feeding is required. Then, open the vent valve and use water to cool down. For routine shutdowns, the remaining liquid inside the kettle should be thoroughly cleaned. Close the bottom valve, feeding valve, steam valve, and discharge valve, etc.

The above 8 methods provide a very detailed guide on how to properly operate the fused silica reaction tanks. We recommend that all users strictly adhere to the operating rules in future production and usage. This will ensure that your fused silica reaction tank equipment operates smoothly for a long time and extends its service life.