STY-2S Double-line 4-Channel Material Non-Destructive Automatic Sorter

STY-2SDouble-line4ChannelMaterial Damage-Free Automatic Sorting Machine

Instrument Introduction: 
     Due to the ability of ferromagnetic materials to induce a certain current value in alternating magnetic fields, our probe emits a uniform magnetic field. This field induces a current in workpieces of the same specification and size but with different hardness and internal surface cracks.The values are different.STY-2SDouble-line4Non-destructive sorting instrument for channel materials is through measuring the workpieces of the same specification size within the probe.The magnitude of the current value to be output and the standard sample of the same specification size, which induces a current value within the probe, are compared, and the results are displayed on the computer screen in the form of magnetic flux. This achieves the measurement of the same specification size of the work piece being tested.PieceMaterialDifferentiate。

Feature Highlights:
  (1) Non-destructive testing; leaves no marks on the workpiece surface after inspection, avoiding the need for traditional testing methods that... 

         Cracks from destructive testing. 
  (II) Wide adaptability to the surface condition and shape of the workpiece; generally, no special requirements for the surface roughness of the workpiece.
 (3) The instrument employs the principle of electromagnetic induction, utilizing a comparison method between the measured workpiece and a standard sample to indirectly measure. 

         The quality of the workpiece. 
  (4) Multi-functional. The instrument performs operations on the workpiece.MaterialAfter inspection, perform ultrasonic testing on the workpiece. If it is found that...MaterialInspection issued 

        Current hardness is not up to standard.Please provide the Chinese content to be translated.No inspection required for flaw detection. 
 (5) The tested workpiece is a qualified product (i.e.)MaterialAnd both flaw detection and workpiece are qualified) and workpiece is不合格product (i.e.)MaterialAnd 

         If any flaw is detected (the inspection is not up to standard), the machine arm will automatically remove it and place it on a separate conveyor track.。
 (Six) The instrument can count products separately after detecting each channel
 (7) The instrument features a history record function, enabling the retrieval of time status for products that have been tested previously. 
  Section 8: The main controller of the sorting machine dynamically displays the magnetic flux of the tested workpiece in a dot diagram. The area where the dot diagram falls corresponds to: 

         Test results, good or bad, are displayed on the computer. 
  (9) The main control instrument of the separator machine is equipped withMaterialWith the upper and lower limit setting function for flaw detection, when the point graph cursor lands 

         Which corresponding area issues the respective material cutting instructions to the cutting mechanism. 
 (Ten) The instrument features data analysis capabilities, enabling the analysis of inspected workpieces, which are displayed as curve waves. 

         Here you goObjectiveUnderstood. 
 (11) Equipment is easy to operate. Fast testing speed, double-line production in one hour does not include manual loading and unloading time.800-900 

           Piece$ per hour.
 (12) Inspecting the workpieceInspection, catering to the needs of mass component inspection, and avoiding the defects caused by random sampling. 

           Product flow-out. 
 (Thirteen) Detection of different workpieces only requires replacing the corresponding probe to meet the detection needs. 
 Paragraph 14: The surface condition of the tested workpiece is consistent, the specifications and dimensions are identical, and a certain degree of processing error is permissible, but the error must not exceed... 

           In compliance with relevant standards.

Instrument specifications:
    1.Inspection Object: Various magnetic materials (steel, iron) componentsMaterialSorting.
   2.Incentive Frequency:Various.
   3.Incentive Power:0~100W。
   4.Amplifier Gain:0~60db
   5.Display Type: Rectangular Fluorescent Oscilloscope Tube 
   6.Testing Speed:2500~3000Piece/Hour 
   7.Geometric dimensions: Customizable as per actual requirements
   8.Power Supply:220V±10V   50Hz

Work Environment:

     Operating Temperature:-15~55℃

     Storage Temperature:-20~60℃

     Relative Humidity: Not exceeding85%

     Working Voltage:AC220±10V

Sorting and Inspection Corner:

Sorting and Inspection Corner: