SWT-610 End-Head Eddy Current flaw detector

SWT-610Type End Flow-Through Eddy Current flaw detector

Instrument Introduction:

SWT-610Type end head eddy current flaw detector for axisymmetricMetal componentsAn all-in-one automatic eddy current inspection device designed for surface crack detection at the end of components. Particularly suitable for cylindrical metal parts.Inspection.
Feature Highlights:

    Driven by a stepper motor, the chain rotates step by step and sequentially passes through the probe for detection. After detection, during the material unloading and flipping, if the product passes, the detected sample is accumulated; if it fails, it is removed by the sorting cylinder. The electrical control module achieves logical control of the entire process through photoelectric switches and the control box; the main detection unit and the probe are precisely measured through pre-multiplexing and planar display.2A mode for outputting detection signals is implemented.

Instrument specifications：
    1.Utilizing dot-type differential probe.
   2.Detectable0.05MMDeep cracks.
   3.The inspection surface is at both ends. 
   4.Testing Speed1.5About a second/Piece(s).
   5.Equipment noise<60dbPower Consumption<500W（220V）。 
   6.Automatic feeding, automatic sorting, automatic counting.
   7.The parts are free of any damage after eddy current testing. 
   8.No demagnetization or cleaning procedures required after inspection.

Work Environment:

    Operating Temperature:-15~55℃

Storage Temperature:-20~60℃

Relative Humidity: Not exceeding85%

Working Voltage:AC220±10V

Inspection Corner:

Inspection Corner: