FET-S Intelligent Digital Eddy Current Flaw Detector

FET-SIntelligent Digital Eddy Current Flaw Detector

Instrument Introduction:

FET-SIntelligent digital eddy current flaw detector for metal barsMaterialOnline and offline flaw detection，Automatic flaw detection suitable for other mechanical components. Equipped with a relatively independent test channel, capable of driving a composite probe composed of differential coils, while simultaneously collecting data through the detection channel for identifying metal pipes and rods.、Longitudinal cracks and transverse defects (such as splits) in the wire during production.Please provide the Chinese content to be translated.Axial defects such as hidden cracks and open fissures have a high sensitivity.

Features:

All cracks and surface defects in the production process can be reliably detected due to failure. The signals obtained from the detection channel canPlease provide the Chinese content that needs to be translated into American English.Displayed on the screen in real-time with impedance plane graphs and time-base scan diagrams. Capable of adapting to various different metals.RodMaterial and wire detection requirements, and due to its fully digital design, it can establish multiple standard testing programs or expert systems within the instrument, facilitating user access when changing product specifications. It is equipped with input/output control interfaces for easy connection to various equipment at the testing site and for synchronized operation, forming a highly automated system.

Technical Specifications:

1Frequency Range:10Hz-15MHz;：

2Enhancement:0-70dbStep pitch0.1db

3Phase:0-360Degree, step pitch1Degree

4Independent selectable frequency

5A variety of style pattern settings

6Automatic phase and amplitude analysis function

7Automatic Zeroing System: Zeroing interval time can be set

8Diverse alarm zone settings for various styles, applicable to all modes

9Gain RatioY/X）：0.1-10

10Auto-screen clear/Impedance Tracking Display

11Features include signal replay, bidirectional access, etc.

12Rapid Simulation/Digital electronic automatic balance and dynamic tracking filter

13User-friendly and intelligent interface, easy to operate

14Compatible with various probes: such as through-hole, rotating, etc.

15Suited for metal tubes, bars, metal components, and online quality inspection at manufacturing plants

16Testing Speed:1m/min～300m/min

17Rapid Digital

18Non-uniform, asymmetric phase alarm area settings

19Multiple display modes: Impedance, Time Base

20Digital Filtering

21Audio-visual alarm output

22Automatic Balance Time

23Clock Selection: Indoor/Outdoor

24Can store a large quantity of various test programs and test data.

25Feature: Optional eddy current signal replay expansion

26Automatic recording of defects display

27Line display, hidden line

28Dimming Display Coefficient:1～100

29Cartesian and Polar Coordinate System Selection

30Automatic Calendar, Time Display

31LCD Monitor

32、StandbyPower Consumption< 10W

33Simulated Electronic Balance

34Measure the amplitude, phase, and digital values of the measurement defects.

Work Environment:

    Operating Temperature:-15~55℃

    Storage Temperature:-20~60℃

    Relative Humidity: Not exceeding85%

Working Voltage:AC220±10V

Inspection Site:

Inspection Site: