598 Portable Eddy Current Flaw Detector

598PortableEddy Current Testing Instrument

Instrument Features:

598PortableEddy current flaw detectors use electromagnetic fixed-position probes placed on the material to be inspected. The probe features an excitation coil and one (or two) detection coils.，The inspection offers the following advantages: the surface of the material being inspected does not require cleaning; the probe does not come into contact with the material surface; the gap change between the probe outer diameter and the material inner diameter has a minimal impact on the inspection results. Inspects both the inner and outer surfaces of the material.InspectionSame sensitivity; high detection sensitivity for uniform thinning, gradient thinning, and uneven thinning; the uniformity of the probe's detection speed has no effect on the results; gases and liquid media within the material have no effect on the results; the detection equipment is compact and lightweight, making it easy for flexible on-site application.

598PortableEddy current flaw detector is the next-generation non-destructive testing equipment for eddy current, utilizingDSPAndFPGADigital electronics technology, far-field eddy current technology, and microprocessor technology enable real-time and effective detection of metals.Partsdefects，No interference from probe lift-off, skin effect, and uneven conductivity and permeability during testing.

598PortableThe eddy current flaw detector is a complete off-axis eddy current testing system featuring advanced performance of multi-frequency eddy current instruments, particularly with high sampling rates, ultra-low noise, and high signal-to-noise ratio, making it a high-performance, multi-functional, and intelligent new eddy current testing equipment in the Asia-Pacific region.

598PortableEddy current flaw detector for inspectingA variety of metal componentsTest equipment includes signal power sources, signal measurement, signal recording, and processing, designed to pass through pipes.。

InstrumentParameters：

1Please provide the Chinese content to be translated.ZeroSystem

2Rapid Mold Digital/拟电子平衡 - Approximate electronic balance

3Automatic (Manual) Eddy Current Signal Amplitude and Phase Measurement, Eddy Current Signal Slow Motion (Adjustable) Expansion Replay

4Time-based scanning and impedance plane display on the same screen

5Configuration analysis function

6Unique non-uniform phase/Range Alarm Area

7Hardware alarm output port

8Capable of storing a vast amount of test programs and test data

9Automatic Amplitude, Phase/Defect Depth Curve Display

10Cartesian and Polar Coordinate Systems Background Selection

11Simultaneous display of in-service pipeline cross-sectional diagrams and inspected pipe row numbers

12、AvailablePortable

13Built-in rechargeable lithium battery (fully charged for use)6-8Hour(s)

14Frequency Range:1 Hz ~ 20 MHzRemote Frequency1Hz～20KHz）；

15Gain:0～90dBIncrement0.5dB

16Phase Rotation:0~359° Step1 °

17Gain RatioY/X）：0.1~10

18Enhancement/Phase Measurement: Manual/Automatic

19、 Display Mode: Dot/Thread/Discreet

20High Pass Filtering: Off0~2000Hz

21Low-pass Filter: Off10~2000kHz

22Digital Filter Points:1~100

23Hardware Alarm Output

24Alarm Output Signal

25Show: Backlit semi-transparent LCD display, suitable for long-term observation in dark or direct sunlight.

26Scanning: Three scanning modes: Erase, Refresh, and Retain.

27Filtering: Digital and Analog Filtering

Work Environment:

   Operating Temperature:-15~55℃

   Storage Temperature:-20~60℃

   Relative Humidity: Not exceeding85%

   Operating Voltage:AC220±10V、DC12V

Inspection Site:

Inspection Site: