Quenching Oil Additive DR-KT
Specialized Oil Series Quenching Oil
Water-soluble Quenching Agent DR-5520
DR-GS Series Industrial Equipment Lubricant
Slow Oil Series Quenching Oil
Corrosion Inhibitor DR-FX
Product Details
Primarily produces quenching oil, quenching liquid, quenching agents, heat tr...
产品Price Negotiable
最小起订Quantity： 供货总Quantity：
Specs： |
|
Origin of Shipment： |
Jiangsu |
Is Customization Available?： |
Customizable |
DR-CX-JC precision stamping oil is composed of refined mineral oil, various extreme pressure additives, and lubricating additives. The active ingredients extend the mold's service life while enhancing the surface finish of the workpiece. Traditional dark sulfurized oil often affects the operator's health and working environment during precision machining. This precision machining oil combines the benefits of light sulfurized oil and oil film strengthening additives, reducing the product's odor and enhancing its rust prevention properties. Inspection Items Data Features Applied Appearance Amber-clear liquid Extend mold lifespan. 2. Lower odor for improved working environment Enhance surface smoothness. 4. For products with sheet thickness of 5-10mm Precision stamping suitable for low-carbon steel, medium-carbon steel, and stainless steel Flash Point (Open Cup, °C) Over 210 Viscosity (40°C, mm²/s) 170-180 Density (g/cm³) 0.875 Corrosion (Copper Sheet 100℃×3h) 2B DR-CX-WD is a low oil mist metalworking oil suitable for forming under high-pressure conditions, such as warm forming of high-alloy steel, high-carbon steel, and stainless steel screws. Inspection Items Data Features Appearance Dark brown opaque liquid Non-irritating odor, good wetting and lubricity, extends mold life 2. Clean, safe, and environmentally friendly work environment 3. Excellent heat dissipation, avoiding high local temperatures on workpieces and molds. Viscosity (40°C, mm²/s) 80-140 Density (g/cm³) 0.95 Flash Point (°C) Over 190 Pour Point (°C) Less than -15 Maximum Non-Cardbite Load Pb Value (N) Over 880 Sintering Load Pd Value (N) Over 5,000 Residual Carbon, % Less than 0.08 Mechanical Impurities N/A The higher the Pb value, the superior the performance of the lubricating oil. DR-CX-WD is a low-oil mist metalworking oil suitable for forming under high-pressure conditions, such as warm forging of high-alloy steel, high-carbon steel, and stainless steel screws. Inspection Items Data Features Appearance Amber Clear Liquid Non-irritating odor, good wetting and lubricity, extending mold life 2. Clean, safe, and environmentally friendly working conditions Good heat dissipation, avoiding excessive local temperatures on workpieces and molds. Viscosity (40°C, mm²/s) 180-210 Density (g/cm³) 0.95 Odor Odorless Products passed the factory inspection should be used within 12 months; if not used within the time limit, they can only be used after re-inspection and approval. The DR-CX series metal forming oil is packaged in 200-liter iron drums or 25kg plastic drums, for indoor storage (temperature 5-40°C).DR - CX Series Precision Punching Oil Introduction
DR - CX Series Cold Forging Oil Introduction
Note: Pb value: indicates the performance of the lubricant; Pd value shows the extreme pressure performance of the oil under high temperature and high pressure conditions. For general lubricants, Pb is 280, and Pd is 1200.DR -CX Series Temperature Control Draw Oil Introduction
Packaging and Storage
Phone Consultation