Concrete Reactor Agitator Selection

The paddle mixer has a simple structure, with blades made of flat steel, which are either welded or bolted onto the hub. The number of blades can be 2, 3, or 4, and the blade shapes can be either flat or V-shaped, distinguishing between radial-force-producing flat paddle mixers and axial-force-producing slant paddle mixers. Paddle mixers are suitable for stirring low-viscosity liquids, suspensions, and solutions.
 

　　One: The purpose of the flocculation coagulation reaction tank agitator:
 

Water-based mixing equipment for sludge ponds and flocculation tanks in wastewater treatment plants, as well as for dissolving and homogenizing solids and liquids in industrial processes.
 

　　II. Structural Composition
 

The JBJ type paddle mixer is composed of the power unit, base, drive shaft, and blade plates, etc.
 

　　III. Features:
 

1. The paddle mixer features a simple structure, reliable operation, smooth non-clogging operation, even mixing, and easy maintenance.
 

2. The paddle mixer can achieve a certain mixing intensity within the required mixing time, meeting the requirements of fast, even, and thorough mixing, with minimal head loss and the ability to adapt to changes in water volume, making it suitable for water plants of various water capacities.
 

　　Section 4: Construction and Operation Process:
 

The JBJ model paddle mixer consists of a stirring shaft, paddle blades, base, and drive unit.
 

When raw water flows through the mixing pool with the liquid flocculant or coagulant, it generates a flow cycle under the action of the paddle mixer, allowing for a rapid and thorough mixing of the coagulant with water, thereby meeting the requirements of the coagulation process.