Plasma+TIG dual welding torch technology

Automatic TIG Welding Gun ALL-27

● Maximum welding current: 500A, 60% duty cycle

●The torch body is designed with an all-water-cooled system

● Tungsten electrode diameter range: 3.2/4.0mm, length: 150mm

● Pre-set tungsten electrode nozzle extension length

● Tungsten electrode replacement time is extremely short.

● Welding gun cables are equipped with full-sealed insulation protection

● Optional Gas Cover

TIG arc oscillation

WXP-500 Plasma Welding Torch

● Compact Welding Gun Structure

● 500A, Load Rate: 60%

● Electrode: Standard length 150mm, diameter from 4.0mm to 4.8mm

Easy to replace and adjust

Auto-alignment

● Plasma Nozzle Diameter (mm)

2.5"-3.0"-3.5"-4.0" cylindrical nozzles

● Insulating and water-cooled protective gas nozzle

● The welding torch can be equipped with a gas shield to enhance protection, especially for improving weld quality during stainless steel and titanium alloy welding.

●The automatic welding torch is a critical component for plasma welding, specifically designed for small hole plasma welding.

● The material of our welding torch and the shape and size of its nozzle are the result of years of meticulous research; they ensure the quality of plasma welding and the longevity of consumables.

Automatic Arc Voltage Tracker (AVC)

● A variable speed plate is located within the mechanical components of the Nertamatic power supply, including the following parts:

An electric slider with a stroke of 80mm

A middle connecting block for a fixed welding torch.

A 360° rotating locking block

A manual slider with a stroke of 50mm

Technical Features

Automatic tracking travel 80mm

Welding gun with 50mm front and rear travel adjustment

Voltage Range for Monitoring: 5-50V

Speed accuracy of the electric slider ±1%

Voltage Tracking Accuracy ±0.1V

Highest electric slider speed: 250 cm/min

Drive Unit - Closed-loop Feedback DC Servo System

Automatic Spooling System

● Often, filling material is required during the welding process.

Prevent weld indentation and undercut

● Offer low-carbon steel and anti-oxidation elements

● Enhanced Weld Strength

● Surface Hardening Treatment

● A variable speed plate is located within the mechanical components of the TRANSMIG 550i power supply, including the following parts:

A support shaft

A Φ300, 15Kg silk feeding disk protective cover

A set of silk-reeling deceleration unit

A 3-meter-long silk feeding conduit

A wire feed position adjustment device

A welding torch, bracket

● Technical Features

Driving Method: Four-Wheel Filament Delivery

Drive System: Closed-loop Feedback DC Servo System

Spooling Speed: 0-10 m/min

Speed Control Accuracy ±1%

Standard steel welding wire diameter: Φ1.0-1.2mm

Φ0.8, 1.6mm are optional items.