Track Sand Blasting Machine

Processing Applicability Range

1) Suitable for dry abrasive (pellet) blasting process.

2) Surface sandblasting for heavy, large components; surface shot peening for reinforcement treatment.

Composition

This unit is composed of the main engine, spray gun, workbench, cyclone separator, sand storage box, dust removal unit, airway system, and electrical system, etc.

Technical Specifications

1) Main Unit Dimensions: 4000 (Width) × 1000 (Depth) × 2600 (Height) mm

2) Cabin dimensions: 3950 (width) x 950 (thickness) x 960 (height) mm

3) Cabin Door Dimensions: 700 (Width) x 780 (Height) mm (three doors)

4) Dust Collector Dimensions: 1000 (width) × 1000 (depth) × 2400 (height) mm (two units)

5) Spray Guns and Nozzles: 3 positions, 3 manual spray guns, nozzle diameter: 9.5mm

Electrical Equipment

1) Power: AC380V, 50Hz

2) Dust Extraction Fan: AC380V, 50Hz, 2x4KW, 2800r/min

3) Lighting Equipment: AC220V, 50Hz, 12 x 20W Fluorescent Lamps

4) Control circuit voltage: AC 24V

Compressed air source

1) Gas source pressure, displacement: 0.8 MPa, 6.0 M3/min [referring to the air volume flow at standard conditions (20°C, 101.325 kPa)]

2) Operating Pressure: Pressure relief valve gauge reading after startup is 0.4～0.7 MPa

3) Single Gun Gas Consumption: Approximately 1.6-1.9 M3/min (depending on the compressed air pressure).

Abrasive

1) Type: Recommended abrasive: Corundum; also available other abrasives such as quartz sand, glass beads, ceramic balls, and steel shots.

2) Abrasive particle size: 24# to 150#, steel shot less than 0.3mm (finer the abrasive, higher the wear rate)

3) Quantity: 50 Kg.