JY-60D Manual Sand Blasting Machine

Composition

This unit consists of the main cabin, dust removal unit, spray gun sanding system, air system, and electrical control system. (The main body is made of 2mm steel plate, with a powder-coated surface.)

Processing Applicability Range

1) Suitable for dry喷砂（media）processing technology.

2) Suitable for small batch processing of small parts, including pre-treatment for sandblasting on workpiece surfaces, beautification processing of craftwork, matte rough finishing of stainless steel products, degreasing and rust removal of parts, and stress relief of parts.

Dimensions: 600(W) × 980(D) × 1650(H) mm

Work cabin dimensions: 580(W) × 520(D) × 600(H) mm

Cabin Door Dimensions: 340mm (Width) x 430mm (Height)

Barrel size: Ø220 (diameter) x 170 (height), carrying capacity: 1.5 Kg

Overall Weight: Approximately 100 Kg Net

Power supply: AC220V, 50Hz, approximately 0.65KW

Tub Motor, AC220V, 50Hz, 90W, 13r/min

Dust collector fan, AC220V, 50Hz, 0.55KW, 2800r/min

Lighting fixture: AC220V, 50Hz, 15W incandescent bulb

Control Circuit Voltage AC220V

Spray Gun - 1 Fixed Spray Gun

Nozzle diameter: 7.5mm

Gas Source Pressure, Displacement: 0.8～1.0 MPa, 1.5 M3/min

Work Pressure: Relief valve gauge pressure after startup is 0.5~0.8 MPa

Single gun gas consumption is approximately 1 to 1.2 M3/min (depending on the gas source pressure)

Pipe Connector Size: 13mm (hose) or G1/2" (rigid pipe)

Abrasive Types Recommended: Aluminum Oxide Abrasives, Glass Bead Abrasives

Abrasive Grain Size 24# to 180#

Abrasive Addition: 5 Kg