Introduction to Maintenance and Care for Iron Art Doors

1. Avoid collisions – this is a crucial point to note after purchasing an iron gate. Handle it with care; the placement should be in an area where it's unlikely to be hit by hard objects. Once a spot is chosen, avoid frequent changes; the wall for installation should remain flat to ensure a stable and even fit for the wrought iron gate. If it摇晃不稳 over time, the gate may slightly deform, affecting its lifespan.

2. Clean and dust: For friends who value cleanliness, use 100% cotton knitted cloths to wipe the door surface. For dust in the indents and embossed patterns on the door, use a soft wool brush to remove the dust.

3. Keep away from acids and alkalis, which can corrode iron gates; they are the arch-nemesis of iron doors. If the iron gate accidentally gets stained, rinse it clean with water immediately, and then dry it with a dry cotton cloth.

4. To prevent moisture, install in a well-ventilated area. Humidity can lead to premature corrosion of metals, causing chrome plating to peel off and affect the door's usage.

5. Rust Removal: If an iron gate has rust, do not主动 sand it down with sandpaper. For minor, shallow rust, dip a cotton rag in machine oil and apply it to the rust. After a while, wipe it with a cloth to remove the rust. If the rust becomes larger and more severe, please consult a relevant technical expert for repairs.