详情描述


Key Features:

★This machine tool is mainly used for the grinding of workpiece inner holes, inner end faces, outer end faces, and step holes.

★The machine tool bed is made of castings, featuring minimal deformation and excellent rigidity.

★The setting and correction of machine tool parameters are done via a touch screen, enabling human-machine dialogue.

★All machine tool moving guideways use high-precision rolling linear guideways with good sliding properties; the feeding reciprocating screws are equipped with high-precision ball screws.

The machine tool feeding and reciprocating systems both utilize two-axis servo system联动 control.

★The machine tool grinding wheel shaft features a high-speed electric spindle, controlled by a variable-frequency drive, achieving stepless speed adjustment.

★The bed-side drawer workpiece spindle bearing uses high-precision rolling bearings, with the workpiece rotating at AC variable frequency and offering stepless speed adjustment.

★Machine tools are available with chuck options including three-jaw chuck, hydraulic chuck, diaphragm chuck, and pneumatic chuck for user selection.

★The machine tool is equipped with a fully enclosed cover, presenting an aesthetically pleasing and elegant appearance.


Machine Tool Model MK2110 Grinding Hole Diameter (mm) φ5-100 Grinding Depth (mm) 150 Workpiece Swing Diameter (mm) Inside φ260, Outside φ480 Bedhead Rotation Angle (°) 20 Workpiece Speed (r/min) 0-800 (Stepless) Grinding Wheel Speed (r/min) 0-42,000 (Stepless) X-axis Servo Motor Power (kw) 1 X-axis Resolution (mm) 0.001 X-axis Travel (mm) 150 Z-axis Servo Motor Power (kw) 2 Z-axis Resolution (mm) 0.001 Z-axis Travel (mm) 500 Workpiece Motor Power (kw) 0.45/0.75 Grinding Wheel Motor Power (kw) 7-9 Total Machine Power (kw) 12.75 Machine Dimensions (mm) 2363×1860×2000 Machine Weight (kg) 3200 Working Precision (Based on Standard Test Piece) Inner Hole Roundness (μm) 2 Inner Hole Straightness (μm) 3 Inner Hole Surface Roughness (μm) Ra0.4