Flash Dryer

Product Introduction:

The flash drying machine is developed and designed based on the absorption of both domestic and international technologies, featuring reasonable design, compact structure, and wide application. It is suitable for drying high-water-content paste materials in industries such as paints, dyes, fine chemicals, fertilizers, feed, food, and electronics, achieving fast, energy-saving, large production with small equipment, and continuous operation.

Flash drying machines are a new type of continuous drying equipment that integrates drying, crushing, and screening. They are particularly suitable for drying filter cakes, pasty, and muddy slurry materials. The drying time of wet materials in the drying tower is only5-8Seconds, the moisture evaporates instantly, and the quality of the dried product is greatly related to the drying temperature, wind speed, air volume, and the rate of crushing.

The working principle of the flash drying machine:

Hot air, at an appropriate jet speed through the inlet pipe, enters the mixing, crushing, and drying chamber from the bottom of the dryer; it exerts strong shearing, blowing, and rotating forces on the material; the material is micropulverized through centrifugal force, shearing, collision, and friction; it enhances mass and heat transfer.

Precautions for using flash drying machines:

1Start the blower first, then the fan, adjust the butterfly valve to ensure gas flow. Adjust the blower valve opening, and operate the dryer under slight negative pressure.

2Start the flash steam dryer air compressor, control the compressed air pressure under multi-channel operating conditions during the design process, and open the cooling water pipe under the bearing of the tower body.

3Open the pulse reverse air system controller of the bag, and adjust the frequency to ensure the gas inlet pressure is0.5-0.6MpaNext task.

4Before wet materials, it's necessary to first determine the moisture content, input the materials into the hopper, start the mixer, and blend the materials.

5The flash steam dryer's gas valve is opened, and the gas ignition temperature and the entry temperature of air into the dryer gradually rise, with the exit air temperature exceeding...110℃Drying Machine, start motor, blade speed adjustment control, ensure stable export temperature at90℃ to100℃. Entry temperature reached350-400Adjust the motor speed to control the body of the drying tower, and maintain the designed temperature under the import and export temperature conditions.

Flash Dryer is particularly suitable for cake-shaped materials, adhesives, and paste drying. The drying tower for wet materials has a short drying time only5Please provide the Chinese content that needs to be translated into American English.8Instant moisture evaporation, product quality and drying temperature, wind speed, air volume, and breakage rate; adjustable flash steam drying tangential air intake; adjustable finished product particle size and moisture content.

Product Specifications:

1.Evaporation rate of moisture with incoming air humidity180Thermometer, exhaust air temperature80Thermometer.

2.Installation capacity is a basic data, which can be altered according to the physical and chemical properties of the material.

3.Lot sizes are arranged according to actual conditions; the data in the table is for reference only.