Rapid Flash Dryer
Disc Continuous Dryer
Propeller Dryer | Sludge-Specific Dryer
Tubular auger dryer
Rotary Flash Dryer
Spray Dryer | Imported Spray Dryer
Disk-Type Vacuum Dryer
Product Details
产品Price Negotiable
最小起订Quantity： 供货总Quantity：
Do you offer customization? |
|
Specs |
Comprehensive |
Shipment Time |
7 days |
Product Description: The twin-cone rotary vacuum drying system is mainly composed of a twin-cone rotary vacuum dryer, condenser, dust collector, vacuum suction system, heating system, cooling system, and electrical control system. This unit is designed with advanced technology, featuring a simple internal structure that is easy to clean. All materials can be fully discharged, with simple operation that reduces labor intensity and improves the working environment. Additionally, due to the container's rotation, materials also rotate without accumulating on the walls, resulting in a high heat transfer coefficient and rapid drying rate. This not only saves energy but also ensures uniform and thorough drying of materials, leading to high quality. It can be widely used in the drying of materials in industries such as chemicals, food, and dyes. Pre-operational checks for the double-conical rotary vacuum dryer to ensure safe equipment operation. 1Check if the filter position inside the drum is upwards. 2Check if the filter meets the technical requirements and is securely fastened with industrial filter cloth. 3Open the vacuum pump, once the tank reaches a certain vacuum degree, insert the material tube into the powder, and use the vacuum to suck the material into the tank. The amount of material loaded must not exceed the total volume of the tank.50Percentages, and the materials must not contain any solid lumps. If the material's density or moisture content is too high, the feed quantity should be appropriately reduced. 4Open the vacuum pipeline valve to achieve the required vacuum degree inside the tank. 5、.Material extraction complete, directly connect the feed port to the atmosphere, close the valves on the vacuum pipeline, remove the feed receiving unit, install the feed tube cap, and ensure its sealing integrity. 6Open the jacket heating steam (or hot water) inlet valve, heat and dry the material inside the tank, but continuously rotate during the initial drying phase to reduce or eliminate material clumping. Product Specifications: Project Model Type Name Unit 100 200 350 500 750 1000 1500 2000 3000 4500 Total Volume L 100 200 350 500 750 1000 1500 2000 3000 4500 Work Volume L ≤50 ≤100 ≤175 ≤250 ≤375 ≤500 ≤750 ≤1000 ≤1500 ≤2250 Heating Area m2 1.16 1.5 2 2.63 3.5 4.61 5.58 7.5 9.6 13.8 RPM rpm 3-13 Power kw 0.76 1.1 1.5 1.5 2 3 3 4 5.5 7.5 Rotary Height mm 1810 1910 2090 2195 2500 2665 2915 3055 3330 4210 Overall Weight kg 550 700 900 1100 1200 1300 1500 2000 3000 4000 Internal Can Design Pressure Mpa -0.1-0.15 Laminate design pressure Mpa ≤0.3 Ordering Instructions: Three heating methods: steam heating, hot water heating, and thermal oil heating. Please specify the temperature tolerance of the material or the operating temperature of the dryer when placing an order, so that our factory can select or provide a heat source for you. When drying sticky materials, our factory will specially design the tank“Counterfeit”Structure Overall equipment packages are priced as required.
Phone Consultation