Online Formic Acid High Vacuum Sintering Furnace - VX610

Feature Introduction

There are 5 sections in the equipment: import, preheat, heating, cooling, and export areas.

The equipment features a total of two vacuum cavities, both internally and externally, distinguishing itself from similar products with a single-layer vacuum cavity. The two-layer vacuum cavities ensure that the workpiece is non-oxidized and that there is no formic acid leakage. The oxygen content is below 5 ppm.

Programmable multi-stage vacuum extraction function: The equipment can achieve programmable 3-5 stage vacuum extraction during vacuum extraction, allowing for precise control of the vacuum extraction rate. It also ensures a constant vacuum level, thereby achieving superior welding quality.

Quick vacuum pump function: Each vacuum pump is equipped with an auxiliary vacuum vessel, which can effectively shorten the vacuuming time in each area of the cavity. Faster vacuuming speed and easier control. Working vacuum level: 20 Pa.

Precise transmission and positioning features: High-precision sensors guarantee each workpiece is accurately conveyed to its designated position, while each zone is equipped with a set of blocking mechanisms to prevent the fixture from exceeding the specified travel distance.

Dual heating system design: Top and bottom independent temperature control heating, effectively improving welding defects caused by uneven module base plates.

Real-time temperature monitoring for each temperature zone: Each preheat, heating, and cooling zone has 6 temperature sensing points, totaling 18, to monitor the evenness of the heating plate temperature. If the temperature difference exceeds the set limit, the equipment will immediately trigger an alarm. The single-zone 6-point temperature sensing alarm system enables real-time monitoring of the temperature uniformity during product welding, ensuring the quality of the weld.

This equipment is independently developed with core proprietary intellectual property rights. No intellectual property infringement risk.

Product Features

A. Only one fixture between modules and heating plates, with better temperature uniformity than similar products; ±2℃%.

B. Heat tubes can be replaced without shutting down the equipment, making maintenance more convenient.

C. Long-term use ensures uniform temperature distribution, and the temperature uniformity of the heating plate can be adjusted by replacing heating tubes with different power ratings during long-term operation.

D、Double-insurance design ensures that the workpiece accurately reaches every vacuum cavity. Bulk production yields high product quality, effectively reducing costs for customers.

E. Preheat and heating zones utilize graphite silicon carbide coated heating plates and thermal blocks, offering excellent temperature uniformity.