What are the maintenance tips for a stable mixing station?

The stable mixing station is a widely used piece of equipment in construction. Its use greatly benefits everyone. Proper maintenance is crucial when using this equipment in everyday life, as good maintenance can effectively extend its lifespan. What are the maintenance techniques for a stable mixing station? Let's find out below!

1. When operating equipment, strictly follow the relevant terms in the user manual. For the bearings of mixers, aggregate belt conveyors, feeding belt conveyors, various batching machines, and spiral conveyors, as well as concrete batching plants, it is recommended to add 5-8 shots of grease into the oil cup with a grease gun before starting the machine each day. After 200 hours of operation, disassemble and inspect, and replace with new grease.

2. Due to the harsh working conditions of the mixer, the blades should be replaced when the area of wear is less than 2/3 of the original size. Apply a small amount of grease to the mixer's drive gears before starting the machine each day.

3. Clean and lubricate each belt machine and belt feeder's tension rod once a week with new lubricant. Open each transmission chain cover once and apply a small amount of lubricant on the chains. At the mixing station and asphalt concrete mixing station, clean the chains after every 300 operating hours.

By introducing the maintenance measures for equipment like the water-stabilized mixing station, you're sure to effectively extend the lifespan of such devices in your daily life.