High Concentration Industrial Wastewater Treatment Process, Low Temperature Evaporator, Small Footprint, Fully Automatic, Quankun

High-concentration Industrial Wastewater Treatment Process, Low-temperature Evaporator, Small Footprint, Fully Automatic, Quankun

Low-temperature heat pump evaporators are typically composed of metal tubes and fins. Working fluid flows through the metal tubes, while air continuously circulates between and around the fins to enhance heat exchange. During the evaporation process, the working fluid absorbs heat and evaporates into a gas, which is then cooled by the compressor and returned to the condenser to re-liquefy. This process can be repeated, enabling the heat pump's cyclic operation.

Equipment Advantages:

The incoming water temperature is at room temperature, and the final outgoing water temperature is also at room temperature, significantly reducing energy consumption.

(2) The entire process utilizes only electrical power, with energy consumption as low as 80~170 yuan per ton of wastewater.

(3) The evaporation equipment operates at a low temperature throughout the process, with the system temperature around 55°C.

Product Features:

A new, highly efficient vacuum evaporation concentration method utilizes compressed steam for condensation, while harnessing the heat generated during steam compression as the heat source for wastewater evaporation.

A low-temperature evaporator is a device used for wastewater treatment, which can lower the temperature of the wastewater to evaporate and remove harmful substances. The process of treating wastewater to meet discharge standards with a low-temperature evaporator typically includes the following steps:

Wastewater Treatment: The wastewater to be treated is introduced into a low-temperature evaporator, where harmful substances in the wastewater are evaporated through processes such as cooling and heat exchange.

2. Equipment Optimization: Adjust and optimize the operating parameters of the low-temperature evaporator based on the characteristics of the wastewater and the discharge standards to enhance processing efficiency and the rate of compliance with emission standards.

3. Compliant Emission: The wastewater treated by the low-temperature evaporator meets national or local emission standards and can be safely discharged into the environment.

Process Features of Low-Temperature Evaporator:

Our 37℃ low-temperature cooler, independently developed and designed to address the common pain points of long process chains and high treatment costs in the Cr-containing solid waste uranium NaHCO3 field, boasts a small footprint, simple process flow, no scaling or clogging risks, high level of automation, remote monitoring capabilities, good water quality, and automatic Chambley features. It helps customers overcome challenges such as limited space, low concentration of waste uranium, scaling and clogging, and high labor costs, while ensuring stable and efficient operations. It also achieves high concentration liquid's Bird's-eye view, resource utilization, energy saving, and environmental protection.

High Concentration Industrial Wastewater Treatment Process, Low Temperature Evaporator, Small Footprint, Fully Automatic, Quankun

Cautionary Notes:

When using low-temperature evaporators, the following points should be noted:

Regularly inspect the equipment's operational status to ensure its proper functioning.

Regularly clean the internal deposits of the equipment to maintain its efficiency.

Based on the quality and concentration of the wastewater, adjust the equipment operating parameters reasonably to achieve optimal treatment results.

When dealing with highly concentrated and polluted wastewater, special attention must be paid to the maintenance and care of equipment to ensure its safe and reliable operation.