Product Introduction:
Product Name: High-Temperature Battery Test Chamber (Customizable to Customer-Specific Dimensions and Specifications!)
Product Brand: HONGJUN/Hongjun
Product Models: HJ/CQ-100ZKX, HJ/CQ-150ZKX, HJ/CQ-800ZKX, HJ/CQ-1000ZKX
Hongjun manufacturer can customize products according to customer's specifications and dimensions!
One, Specification of High-Temperature Test Chamber for Lithium-Ion Batteries:
1. Internal dimensions: 1000 (width) x 1000 (depth) x 1000 (height) mm (Custom sizes available!)
2. External dimensions approx.: 1355 (width) x 1705 (depth) x 1855 (height) mm, actual product measurement applies.
3. Control Panel: The control panel is located at the top of the machine (as shown in the figure).
4. Door Opening: Single door opens from right to left.
5. Separator: Internally divided into four layers, with the bottom layer starting at 50mm; the remaining three layers are evenly distributed above, accompanied by four separator plates.
6. No Visual Window: The door does not have a visual window; (as shown in the image)
7. Sealing materials include: high-temperature-resistant silicone strips.
8. The cabinet structure consists of: the lower part being the product chamber, and the upper part for the installation of the electrical control box.
9. Vacuum Pump Installation: The vacuum pump is mounted at the rear of the machine.
10. Inner box material: High-temperature resistant SUS316# stainless steel industrial plate, 5.0mm thick, reinforced treatment for vacuum extraction without deformation.
11. Outer case material: 1.2mm thick cold-rolled steel plate, with double-sided baked paint finish (milk white).
12. Insulation Material: Fiber rock wool used for good thermal insulation, thickness of 100mm.
13. Equipment Operating Environment: Operating temperature 5 to 25°C, operating humidity 35% to 75%.
14. Equipped with adjustable swivel casters and adjustable fixed foot cups at the bottom of the machine.
15. For detailed technical information, please contact Dongguan Hongjun Instrument Equipment Co., Ltd.'s wealth line: 138-2697-1056 for more details.
Section 2: High-Temperature Battery Test Chamber Temperature Control System
1. The temperature controller is a digital indicator (Taishong Instrument), featuring single-point temperature control, automatic calculation, simultaneous display of PV/SV, and key setting.
2. Timer Function: 0-9999 hours/minutes/seconds, temperature countdown timer; heating stops and an alarm prompts upon time expiration.
3. The thermocouple wire is Type (K).
Output: 3-32V
5. Current controller: SSR solid-state relay
6. Heating Method: Tri-side radiant heating (heating the left, right, and bottom walls of the inner box)
7. Heating element: High-temperature-resistant stainless steel heating tube.
8. Temperature Range: adjustable from room temperature +25 to 250℃.
9. Instrument Control Accuracy: ±0.5℃
10. Instrument accuracy display: 0.1℃
11. Temperature Deviation Inside the Box: ±6℃ (No-load test).
Section 3: High-Temperature Battery Test Chamber Vacuum System
1. This unit uses high-density silicone sealing strips for door sealing, ensuring excellent overall sealing performance.
2. Utilize a Panasonic digital vacuum gauge to display the vacuum level inside the box.
3. Vacuum sensor type: Pressure sensor.
4. Vacuum Range: 0.0KPa to -100.0KPa
5. Vacuum Preservation Pressure Leak Rate: approximately 1.0 KPa per hour.
6. Vacuum control is automatic, stopping at the upper limit and starting below the lower limit, with a cyclic operation to maintain vacuum level.
8. Vacuum Extraction Requirement: Vacuum must be extracted before heating; it is strictly prohibited to vacuum after the temperature inside the box exceeds 80 degrees.
9. Pressure Relief Method: Utilizes an electromagnetic valve for control; manual pressure relief is required when pressure relief is needed.
10. Vacuum Tube: 304# stainless steel KF25 high vacuum bellows + clamp.
11. Vacuum Control Valve: High vacuum pressure differential valve with KF25 connection (as shown in the figure).
12. Vacuum Pump Configuration: Goodkade RH0063 Single Stage Vacuum Pump, Power 380V/2.2KW. (As shown in the figure)
Section 4: High-Temperature Battery Test Chamber Protection System
1. Over-temperature Protection System: In the event of temperature going out of control, the heating power supply will automatically shut off once it exceeds the over-temperature protection setting, thereby ensuring the safety of both the product and the machine.
2. Circuit Protection System: Grounding protection, quick fuse, phase loss protection, overload protection, circuit breakers, etc.
V. Lithium-ion Battery High-Temperature Test Chamber Machine Power:
1. Voltage: 380V/50Hz, Three-phase Five-wire System
2. Current: 27A
3. Total Power: 18.0 KW
4. For details, please contact Dongguan Hongjun Instrument Equipment Co., Ltd.
