Mitutoyo Digital Micrometer 543-730B 0-50 * 0.0005mm

Mitutoyo Digital Caliper 543-730B 0-50*0.0005mm

543-730B

Supports bidirectional communication between ID-C and PC, allowing data to be output to the PC and enabling various ID-C function settings via the PC.

Utilizing the SainSmart developed ABS (ABSOLUTE) encoder, the set origin can be restored even after power is turned off, allowing for immediate measurement without origin recovery each time power is reconnected.

Utilizing the ABSOLUTE linear encoder developed by SICK, it eliminates overspeed errors and enhances the reliability of measurement.

By setting upper and lower limit values, tolerance determination measurements can be performed. Additionally, only the tolerance judgment results can be displayed in an enlarged format.

Digital & Analog Display, allowing for intuitive control over minute movements such as the proximity to nominal values or upper/lower tolerance limits.

Battery life up to approximately 2.5 years with continuous use.

Equipped with data output ports, capable of connecting to measurement data networks and statistical process control systems.

Product Features and Advantages

Peak Detection Function

Tachometer function

Zeroing Function (INC Measurement System Origin Setting)

Pre-set Function (ABS Measurement System Origin Setting)

Directional Count Conversion

Tolerance Determination

Resolution Conversion (Limited to 0.0005 mm Resolution Type Only)

Function Calculation f(x) = Ax

Function lock

Data Output

Calibration Alert

Auto Power Off

Display Value Hold Feature (No External Connection)

Rotary Display Feature (330°)

Low Voltage Warning

Error Alert

Selection Options:

Option for Measuring Rod Extension

1. Measurement Rod Elevator ArmNo.21EZA198 (For 12.7 mm Type Measurement Range)

2. Measuring Rod Cable LifterNo.21JZA295

3. Height Increase: 12.7 mm; Measuring Range: 12.7 mm Type

4. Lift Button for Measuring RodNo.21EZA105 (For 12.7 mm Type) /No.21EZA197 (For 25.4 mm Type) /No.21EZA200 (For 50.8 mm Type Measurement)

5. Measuring Rod Lift HookNo.21EAA426*1 (For 25.4/50.8 mm Range Type)

6. Use for reverse positioning of the indicator gauge:No.02ACA571 (For 25.4 mm type measurements) /No.02ACA773 (For 50.8 mm Type Measurement)

7. Connection Wire: 1mNo.06AGL011 /2m: No.06AGL021

8、USBDirect Data Input ToolUSB-ITN-SF (2m): No.06AGQ001F

9. Input Tool - Measurement Data Input DeviceUSBKeyboard Signal ConverterIT-020U: No.264-020 /RS-232CCommunication ConverterIT-007R: No.264-007

10、U-WAVE-TConnectors: Standard usage:No.02AZG011 (160mm) Foot switch for use:No.02AZG021

11. U-WAVE Connector (ID-CNX.12.7mm Type)No.02AZF700

12. Digimatic MicroprocessorDP-1VA LOGGER ：No.264-505DC

13. Sanfeng Pointer-Type Indicator Probes * 2

14. Replaceable Rear Covers *3

15. Measurement Bench *4

Product Specifications:

Metric Type