Mitutoyo Trimos Digital Micrometer 293-589

Mitutoyo 3D Digital Micrometer 293-589

293 Series

Digital Outside Diameter Micrometer MDC-MB

●Large digital micrometer series, product length up to 500 mm. Equipped with a ratchet lock-tight constant force device.

All models are equipped with measurement data output functionality, convenient for measuring large workpieces. Available with optional communication cables or wireless systems.

The system allows for easy data transfer and importation into spreadsheet software, offering various usage methods.

● Measurement surface is made of hard alloy

■ Features

Origin Setting:

(ABS Measurement System)

Press the origin button, reset to the current micrometer screw position.

Set ABS origin. Depending on the size, origin can be set.

Point value.

Set to Zero

(INC Incremental Measurement System)

Briefly press the ZERO/ABS button, on the current micrometer screw

The location setting is showing zero, switch to (INC) Increment

Measurement mode, hold the button down to reset to ABS measurement mode

Please provide the Chinese content to be translated.

Data Hold: Press the Hold button to freeze the current value on the display screen.

A feature for operation in poor visibility conditions.

Prior to recording the reading, the instrument must be removed from the workpiece.

Time measurement during disassembly is very useful.

Functional Lock: To prevent the original point position from being altered due to accidental operation, it can

Lock Origin (Origin Setting) and Zero (Set Zero) features

Zero) Features.

Automatic Power Supply

On/Off

If not used for approximately 20 minutes, the LCD display will...

The reading on the display will disappear, but the origin is saved.

Adjust the micrometer screw, rotating it to view the reading on the LCD display.

Reemerging.

Data Output: Features measurement data output terminals for statistical establishment

Process control systems and measurement systems.

Error Alert: If there is an overflow on the LCD display, or if the calculation

Error, error message appears on the LCD screen.

Measurement function has stopped. This will prevent the instrument from providing incorrect readings.

Misread values. When the battery voltage falls below a certain level, the measurement

Low battery voltage warning prior to normal operation.

The signaler will appear to remind users to replace the battery.