Mitutoyo Mitutoyo Anti-Coolant Micrometer 293-242-30

Mitsubishi Miter Saw 293-242-30

● The Mitutoyo Standard Digital Micrometers MDC Series boasts exceptional accuracy and excellent environmental resistance, suitable for various measurement applications.

● Enhanced single-handed operability through ratchet sleeve design.

All plastic components are made of oil-resistant materials.

● Models with measurement data output capability can establish statistical process control systems and metrological systems.

Function

Origin Setting:

(ABS Measurement System)

Press the Origin button, to reset to the current position of the micrometer screw.

Set ABS origin. Can be set according to different sizes.

Point value.

Set to Zero

(INC Incremental Measurement System)

Briefly press the ZERO/ABS button, on the current micrometer screw

Location setting displays as zero, switch to (INC) Increment

Measurement Mode, hold the button down to reset to ABS measurement mode

Please provide the Chinese content to be translated.

Data Hold: Press the Hold button to freeze the current display value.

This feature is for poor visibility conditions

Below, prior to recording the reading, the instrument must be removed from the workpiece

The measurement when moving up is very useful.

Data Output: Equipped with measurement data output terminals, capable of establishing statistics

Process Control Systems and Measurement Systems.

*  Available for MDC-MX/MXT only.

Automatic Power Supply

Open/Close

If not used for about 20 minutes, LCD

The reading on the display will disappear, but the origin is preserved.

Store, rotate the micrometer screw, to adjust the LCD display

The reading shows again.

Error Alert: If overflow occurs on the LCD display, or the calculation

Error, error message appears on the LCD screen.

Measurement function has stopped. This will prevent the instrument from providing incorrect readings.

Misreadings. When the battery voltage falls below a certain level, measurements

Low battery voltage warning prior to normal operation of quantity

The sensor will activate to remind users to change the battery.

Function lock: To prevent the original position from being changed due to incorrect operation, it can

Lock Origin (Origin Setup) and Zero (Set Zero) features

Zero) Features.