PP ductwork, PP pipe, industrial dust removal workshop ventilation equipment, factory exhaust, large diameter PP ductwork

PP rectangular pipes, when passing through fireproof and explosion-proof walls or floors that require closure, should be equipped with embedded pipes or protective sleeve pipes, with the steel plate thickness not less than 1.6mm. The gap between the air duct and the protective sleeve should be sealed with flexible materials that are non-combustible and harmless to humans.

Manual shut-off valve installation: The arrow direction on the valve is aligned with the airflow direction of the duct.

Ducts, silencers, and other components should be wiped clean, free of oil stains and loose dust. Ports should be sealed when construction is paused or completed.

The duct strength should be sufficient to prevent cracking at the joints under 1.5 times the working pressure.

Installation Precautions for Ductwork and Duct Calculation Ensure the main duct velocity is 5 m/s and the branch duct velocity is 3 m/s when designing the ductwork to be as small as possible. Duct calculation formula: (Selected Equipment Airflow ÷ 3600) ÷ Wind Speed = Duct Cross-sectional Area. Also, note that the duct: Length ÷ Width ≤ 4, generally do not exceed 4, and treat special cases differently. Duct Opening Selection: (Selected Room Airflow ÷ 3600) ÷ Wind Speed = Diffuser throat cross-sectional area. Note: The double-baffle duct opening area is the area obtained from the above formula ÷ 0.7.

Features of PP Square Pipe Products

The muffler is primarily composed of components such as the muffler tube, muffler plates, top and bottom covers (or heads), rain cap, throttle tube, throttle plate, connecting pipe (or flange), bracket, lifting ring, and nameplate, etc.

2. Easy installation, excellent noise reduction, and long service life.

3. The muffler can be independently supported, allowing for free expansion during operation and shutdown, thus preventing the exhaust piping from being subjected to additional loads due to the muffler's installation, ensuring the reliability of the exhaust piping operation.

4. Special movable connection devices can be used according to design or customer requirements.

5. The muffler is made of materials such as carbon steel or stainless steel, offering sufficient heat resistance and corrosion resistance, ensuring the equipment's long-lasting durability.