26GHz Radar Level Gauge Product Overview
The 80X series sensors are 26G high-frequency radar level gauges, capable of measuring distances up to 80 meters. The antenna has been further optimized, and the new, rapid microprocessor enables faster signal analysis and processing, allowing the gauge to be used in complex measurement conditions such as reactors and solid material silos.
26GHz Radar Level Gauge Product Principle
The radar level antenna emits a narrow microwave pulse, which is transmitted downward through the antenna. Upon contacting the surface of the medium being measured, the microwave is reflected back and then received again by the antenna system. The signal is then transmitted to the electronic circuitry, which automatically converts it into a level signal (since the propagation speed of microwaves is extremely fast, the time it takes for the electromagnetic wave to reach the target and be reflected back to the receiver is almost instantaneous).
A Range Setting B Low Adjustment C High Adjustment D Blind Area Range
The reference surface for measurement is: the threaded bottom face or the sealing face of the flange.
Note: When using radar level timing, ensure that the material level does not enter the measurement blind area (as shown in area D in the diagram).
26G Radar Level Gauge Features:
Small antenna size for easy installation; non-contact radar, no wear.
virtually unaffected by corrosion, foam, and influenced minimally by atmospheric moisture, temperature, and pressure changes
The severe dust environment has little impact on the operation of the high-frequency level gauge.
Shorter wavelength, better reflection on inclined solid surfaces.
Beam angle is small, energy is concentrated, enhancing echo capability while also benefiting in avoiding interference objects.
The measurement blind area is smaller, and it also achieves good results for measuring small containers.
High signal-to-noise ratio, delivering superior performance even under fluctuating conditions.
High frequency is the ***choice for measuring solids and low dielectric constant materials.
