TO230A diesel generator welding machine with wheels
Most customers are seeking ways to save fuel consumption while saving the operating costs of Dazhe generator sets. After summarizing their operating experience, the staff of Dazhe generator have compiled some energy-saving tips for everyone, which will be shared with you in the following text.
1. Try to choose a generator set that is suitable for your own power needs. Do not choose a set that is too large to avoid high fuel consumption, and do not choose a set that is just right to avoid long-term use of the generator set, which may result in a decrease in power later on Under normal circumstances, excluding the starting current factor, you should choose to use 80% of the power of the generator set to meet your required power
2. Regularly check and replace the oil filter, filter, and air filter on the generator set Because over time, it is inevitable that impurities will clog the three filters, which can easily lead to high fuel consumption
3. Choose high-grade fuel from regular gas stations Because these oils are relatively clean Also, after purchasing fuel, it needs to settle for a period of time before use
Model: TO230A
Generator parameters
Rated power: 5KW
Backup power: 6KW
Rated frequency: 50HZ
Rated voltage: 220V
Power factor: 1.0
Number of phases: single-phase
Welding machine parameters
Welding module: automatic welding module
No load voltage: 65V
Welding voltage: 22-30V
Welding rod range: 0-5.0mm
Current regulation: 0-230A
Welding machine grade: industrial grade
Welding continuity rate: 100%
Welding current: inverter DC welding machine
engine parameters
Engine model TO190
Engine type: Single cylinder air-cooled diesel engine
Piston displacement: 420CC
Power speed: 13HP/3000kpm
Startup method: manual/electric startup
Lubricating oil volume: 1.1L
Fuel consumption 205g/kw. h
Fuel type: diesel
Other parameters
Unit size: 760 * 520 * 680
Structure type: Open frame/Hand push
72 at a noise level of 7M
Fuel tank capacity: 25L
Battery: 12-8.3V-Ah
Net weight: 102
The standard configuration of the generator welding unit is as follows
Voltage, welding current regulation, frequency, machine operation indication, cooling fan, safety protection:
Start the battery and the battery starting connection cable;
Welding rod functions: 506, 507, ordinary welding rod, cellulose welding rod, alkaline welding rod, low hydrogen welding rod, carbon welding rod, stainless steel welding rod, etc.
Usage conditions: Environment -35-55 degrees Celsius: altitude within 2000 meters.
TO Daze diesel engine: dustproof, sand proof, shock resistant, and has good environmental adaptability!
Auxiliary power: 5KW/50HZ auxiliary power output, can be equipped with lighting, handheld drill, water pump, etc.
Optional accessories (additional cost)
High frequency diesel welding machine TO rare earth permanent magnet motor
High altitude fuel injection pump 4000-6000 meters high power version TO engine
Execution standard: International standard certification ISO9001:2000 Industry execution standard GB/T2820.1997
TO230A diesel generator welding machine with wheels
Original Dazhe Power Welding Machine Usage:
【1】 Mainly used for welding on construction sites without power supply, welding generator sets, fast arc initiation, continuous arc, easy to move, easy to operate, reliable, especially suitable for municipal emergency repairs or special outdoor environments.
【2】 Daze welding machine accessories: oil alarm, voltage indicator, current indicator, time running meter, battery capacity: 12V-36A maintenance free battery, standard equipment.
