LMLWater-based high-abrasion-resistant painted road surface
Limei RoadLMLWater-based high-wear-resistant colored road systems are created using Dow's latest waterborne composite resins, combined with new equipment and technology. After years of technical application and development, they effectively cover road cracks and depressions, reflect ultraviolet rays, reduce rain erosion, delay asphalt aging, lower the thermal conductivity of the city, and decrease road temperatures.5-7 degrees.
This material is the only one currently in use worldwide for applications on colored roadways..A water-based material with a curing agent, which, while meeting high environmental protection requirements, also exceeds the performance of any current oil-based material. NewOur SC water-based high-wear-resistant colored road material matches the shrinkage ratio with asphalt, combined with embedded construction techniques, it perfectly addresses the current issues of cracking and delamination in colored road surfaces. It significantly reduces the occurrence of reflective cracks and delamination caused by the asphalt base, maintaining the texture of asphalt without compromising its breathability. Even if the original asphalt base develops reflective cracks, the impact on the surface appearance and performance is negligible. With an expected lifespan of 8-10 years, after reaching the end of its service life, a mere thin coating with low budget costs will restore its vibrant colors, as the original colored base remains stable!
Product Features: Easy installation, durable, eco-friendly, resistant to chemical corrosion, colorfast, and good anti-slip performance. Mainly suitable for: parks, amusement parks, pedestrian walkways, riverbanks, parking lots, squares, and asphalt roadways.
Material Description：LMLWater-based high-abrasion-resistant colored road material
LMLColor road material is a water-based paint, non-toxic and free of刺激性 odors, and has passed the U.S.LEED Environmental Protection Certification
Primary Materials: Colored Base, Middle, Surface, and High Stain-Resistant Protective Layer.
Drying Time:At approximately 25°C, the drying time is 1-4 hours. It is recommended to extend the maintenance time for the colored pavement as much as possible to achieve the best results.
Technical Specifications:
This product has been tested by the Ministry of Transport's Testing Center and the Construction Ministry's China Construction Academy, meeting dozens of technical standards including film appearance, water resistance, low-temperature crack resistance of the coating, skid resistance, and environmental protection requirements, all in compliance with the traffic industry standards.Relevant provisions for cold-laid coatings in JT/T712-208 "Road Anti-Slip Coatings."
RingGuaranteed Quality: VOC Content ≤ 25g/L
Anti-Coefficient of Friction: High anti-slip (BPN ≥ 70)
Construction Temperature:10°C——35°C
Ice0°C.
Coating Application Process:
Closed construction area.
2. Road sweeping and cleaning
3. Draw the baseline according to the design drawings and position the line.
4. Apply shielding tape around the edges.
5、LMLUndercoat mixing and spraying
6、LMLMidcoat mixing and spraying (the second coat must be fully dried before proceeding to the next step).
7、LMLSurface mixing, spraying
8、LMLProtective coating mixing and spraying
9. Custom logo painting and protective film spraying.
10. Open traffic.
Product Features:
The product features unique design, rich colors, and exceptional performance..Highly reflective to sunlight, this product reduces road radiation heat, mitigates urban heat island effect, and effectively conserves energy, featuring versatility, environmental friendliness, and aesthetic improvement.
1. Eco-Friendly: Passed the certification by the internationally authoritative green building safety assessment organization (LEED), non-toxic and harmless, free of刺激性 odors.
2. Exceptional Performance.Yue: Features UV protection, reduces heat island effect, lowers pavement temperature, delays asphalt aging, and extends pavement lifespan.
3. Unique Design: Utilizing specialized infrared heating equipment, various road surface three-dimensional effects and decorative designs are molded onto the existing asphalt pavement, significantly enhancing the road's aesthetic appeal.
4. Rich in Colors: The diverse hues effectively compensate for the monotonous color of traditional asphalt roads, enhancing the aesthetics of the road environment.
5. Easy Construction: Directly applied on the existing asphalt road surface, with a short construction period and quick return to traffic.
6. Excellent anti-slip properties: sharp.The combination of water-based high polymer polymers and high-intensity abrasion-resistant aggregates effectively enhances the anti-slip performance of road surfaces.
7. High Elongation: The water-based polymer has the same expansion coefficient as asphalt, effectively preventing coating cracking.
8. Strong Adhesion: Excellent adhesion properties, suitable for use on iron products and concrete surfaces.
9. Eliminate Color Discrepancies: Capable of removing the color difference between new and old surfaces after road repairs, maintaining consistent road color.
