Product Specifications

DSH-10A Halogen Moisture Meter is used for rapid determination of free moisture in various samples such as chemical raw materials, grains, minerals, biological products, food, pharmaceutical raw materials, paper, and textile materials.

Product Details

In recent years, environmental protection and resource conservation have become hot topics worldwide. Against this backdrop, the chemical industry is continuously exploring how to achieve sustainable development. The introduction of the halogen moisture analyzer DSH-100A-1 provides chemical companies with a more precise, efficient, and reliable moisture detection solution, helping the industry meet its sustainable development goals.

Halogen Moisture Meter DSH-10A is used for rapid determination of free moisture in various samples such as chemical raw materials, grains, minerals, biological products, food, pharmaceutical raw materials, paper, and textile materials. During testing, the dry state can be directly confirmed, and the estimated completion time can be predicted. With its automatic skin removal function, measurements can be continuously conducted in real-time, and accurate measurements can also be achieved through zero-point drift calibration.

DSH-10A Features

1. High-resolution backlit dot matrix LCD display, easy to operate in low light conditions for greater visual comfort.

2. Push-button chain disk for added convenience in operation.

3. High-precision thermal insulation sensor, reliable data temperature collection.

4. Utilizes halogen lamp heating for drying, offering rapid temperature rise and short testing time.

Section 2: Halogen Moisture Analyzer Function

During the testing process, the dry state can be confirmed directly, and the estimated completion time can be deduced.

2. With automatic skinning function, continuous measurements can be made instantly, and accurate measurements can also be achieved through zero-point drift correction.

3. IntegratedR 2 32C output interface, compatible with connecting computers, printers, and other peripheral devices.

III. Usage Instructions

1. Prepare samples: Weigh the samples to be tested and prepare the samples according to relevant standards or methods (such as decontamination, powdering, etc.).

2. Place sample in chamber: Insert the sample into the sample chamber of the halogen water content analyzer and close the chamber door.

3. Set Parameters: Adjust the temperature and time according to the characteristics of the sample. This can be done via the control panel on the equipment.

4. Begin Testing: Press the power switch to start the halogen moisture analyzer. The device will automatically preheat and begin testing once it reaches the set temperature, which typically takes 20 minutes to several hours.

5. Result Obtained: After testing, the moisture content of the sample will be displayed on the screen. As required, the test results can be converted to percentages or other units.