Xiangke DHF82Multi-element rapid analyzerChemical Composition Analyzer

DHF SeriesMulti-element Rapid AnalyzerThis analyzer is developed based on the principle of photometric analysis, utilizing advanced linear expansion and sensitivity enhancement techniques to address the issues of traditional photometric analysis, such as deviations from linearity at high component concentrations and poor sensitivity at low component concentrations. It achieves rapid analysis with wide range and high precision. It holds a significant advantage in the silicate system field, particularly suitable for industries such as ceramics, refractory materials, cement, glass, geology, and non-metallic minerals. The product has been widely used in colleges and universities, research institutions, and industrial enterprises, and has already entered the market.

　Key Technical Parameters

1. Measurement Range

1-1. Measurement Elements and Scope

SiO2　0.2-99% 　Al2O3　0.2-99%    Fe2O3   0.1-99% 　 TiO2　0.1-99%

K2O   0.1-15%     Na2O　0.1-15% 　CaO　 0.1-99%  　MgO　0.1-99%

B2O3  0.1-30%     ZrO2    0.1-99%     Li2O　 0.1-15%     SnO     0.1-99%

PbO   0.1-99%     ZnO    0.1-99%     MnO   0.1-15%      Cr2O3    0.1-15%

BaO   0.1-10%      NiO   0.1-15%    CoO    0.1-10%        P2O5     0.1-30%

1-2Rapid analysis of the main components of the following chemical raw materials:

Chrome salt products, V2O5 products, MnO products, NiO products, titanium powder, cobalt oxide, zinc oxide, boric acid, borax, water glass, sodium humate.

1-3. High-precision analysis of low-content components

The detection limits of elements such as Fe2O3, TiO2, K2O, Na2O, CaO, MgO, P2O5, MnO, and Cr2O3 can be extended to 0.02%, with analysis accuracy better than 0.02%.

2. Analysis Accuracy: The accuracy of analysis for each element meets or exceeds the permissible errors stipulated in the relevant national standard analytical methods.

3. Analysis Speed: Full analysis of SiO2, Al2O3, Fe2O3, TiO2, K2O, Na2O, CaO, and MgO completed within 2-3 hours from the start of weighing.

4. Sample Channels: 3

5. Number of consecutive samples measured: 10

　Section 3: Equipment completeness

1. DHF82 Model Mainframe - One Unit  2. Data Processing System - One Set (includes test software, computer)

3. Flame Photometer - 1 Set  4. 30ml Silver Crucible - 4 (with lid)

5. Ultrasonic Cleaner - One Unit

    IV. Instrument Operating Conditions

1. Power Supply: 220V 50Hz 2. Total Power: 1KW

3. Total Weight: 100 Kg  4. Installation Area: 3500×850mm Worktable

5. Environmental Temperature: 5～30℃  6. Relative Humidity: Less than 85%