Product Specifications
Brand: YingTeng
Model: YTZL450M
Test Conditions: 20°C, 60%
Dehumidification Capacity: 2.0 kg/h
Airflow/Excess Pressure: 460/100 PA m³/h
Regenerated Airflow/Excess Pressure: 150/50 PA m³/h
Operating Power / Current: 3.7kW / 16.1A
Voltage/Frequency: 220V/50Hz
Regeneration Heating Method: Electric Heating PTC
Frame Material: Cold Rolled Steel / Stainless Steel
Electrical Shock Protection Type: Type Ⅰ
Waterproof Rating: IPX3
Air Filtration Treatment: Pre-Filter G4
Regenerated Air Filter: Initial Efficiency G4
Control Method: LCD + Buttons
Length: 930mm
Width: 513mm
Height: 622mm
Handle intake: Φ160mm
Handle Exhaust Air: Φ160mm
Regenerated Inlet: Φ100mm
Rebirth Airflow: Φ100mm
Manufacturer: Henan Tongteng Explosion-Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only, and the actual unit should be used as the standard.
Product Features
Swedish Proflute
The core turbine employs the internationally top-tier Swedish brand Proflute turbine, boasting an extended lifespan with continuous operation for 10 years without any failures, and maintaining excellent dehumidification performance throughout.
SCR
Utilizing SCR energy-saving constant temperature control technology, it effectively ensures the stability of the heating system, allowing for worry-free long-term operation.
Low Dew Point Dehumidification Operation
Even in extreme environments where traditional condensation dehumidification methods fail due to very low dew points, our system can still ensure efficient dehumidification with an expanded dehumidification range.
PTC
The regenerative heating employs the latest German PTC thermistor, reducing the hazardous distance of PTC's thermal radiation. In addition to retaining the typical characteristics and advantages of PTC thermistor heating, it also improves the regenerative heating efficiency by 10% to 15%, demonstrating significant energy-saving effects.
Trip-free protection mode, for added peace of mind
The desiccant wheel features a shutdown protection function, which effectively detects the wheel's operation status to ensure the equipment runs smoothly.
Smart Control System, Precise Humidity Control
Set the target humidity level, the intelligent control system will achieve automatic and precise humidity control to reach the target humidity.
The core component of a rotary desiccant dehumidifier is a honeycomb rotor, which is made of a special ceramic fiber carrier and composite activated silicone; the rotor is divided into two zones on either side by a custom sealing device: the treatment zone and the regeneration zone.
As moist air requiring dehumidification passes through the treatment area of the wheel, the moisture vapor in the wet air is adsorbed by the active silica of the wheel, while the dried air is sent to the space for treatment by the handling fan. The wheel, which rotates slowly and continuously, carries the approaching-saturated moisture vapor into the regeneration area; the high-temperature air blown in the opposite direction within the regeneration zone desorbs the moisture adsorbed in the wheel, which is then exhausted outdoors by the fan, restoring the wheel's moisture adsorption capability and completing the regeneration process.
Utilizing imported honeycomb-shaped silicone desiccant rotors, these are structured into a cylindrical disc. The rotor is then rotated within a ceramic silicone crystalline chamber, separating into a desiccant zone and a regeneration zone. Air used for drying passes through the desiccant zone, where it is absorbed by the rotor to remove moisture, resulting in dry air. After absorbing moisture, the desiccant zone rotates into the regeneration zone, where it is heated by the air to expel moisture outside. The rotor returns to the desiccant zone after releasing moisture, thus continuously performing drying and regeneration. This process yields a consistent supply of dry air.
