Product Specifications
Brand: YingTeng
Model: YTZL320M
Test Conditions: 20°C, 60%
Dehumidification capacity: 1.2 kg/h
Handle airflow/residual pressure: 320/100 PA m³/h
Recirculation Airflow / Excess Pressure: 120/50 PA m³/h
Operating Power / Current: 1.9kW / 8.26A
Voltage/Frequency: 220V/50Hz
Reheat Method: Electric Heating PTC
Frame Material: Cold Rolled Steel / Stainless Steel
Electrical Shock Protection Type: Type I
Waterproof Rating: IPX3
Initial Efficiency G4 Air Filter Treatment
Regenerated Air Filter: Pre-Filter G4
Control Method: LCD + Buttons
Length: 640mm
Width: 425mm
Height: 366mm
Handle intake: Φ125mm
Handle Exhaust: Φ125mm
Regenerated Inlet: Φ80mm
Rebirth Exhaust Fan: Φ80mm
Manufacturer: Henan Tongteng Explosion-proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only; the physical product shall prevail.
Product Features
Sweden Proflute
The core roller is equipped with the top-grade Swedish Proflute brand, offering an exceptionally long lifespan, with continuous operation for 10 years without any fault, and maintaining optimal dehumidification performance.
SCR
Utilizing SCR energy-saving constant temperature control technology, it ensures the stability of the heating system, allowing for worry-free long-term operation.
Low Dew Point Dehumidification Operation
In extreme environments where traditional condensation dehumidification methods are ineffective due to very low dew points, our solution still ensures efficient dehumidification with a broader dehumidification range.
PTC
The regenerative heating utilizes the latest German PTC thermistor, shortening the PTC's thermal radiation hazardous distance. In addition to retaining the typical characteristics and advantages of PTC thermistor heating, it also boosts the regenerative heating efficiency by 10% to 15%, demonstrating significant energy-saving effects.
Stall Protection Mode, for added peace of mind
The dehumidifying drum features a shutdown protection function, which can effectively monitor the drum's operation status to ensure the equipment runs smoothly.
Smart Control System, Precise Humidity Control
Set the target humidity level, and the intelligent control system will achieve automatic and precise humidity control to reach the target humidity.
The core component of the rotary desiccant dehumidifier is a honeycomb-shaped rotor, made from a composite of special ceramic fiber carrier and active silicone; the rotor is divided into two zones on each side by a custom sealing device: the treatment area and the regeneration area.
As humid air requiring dehumidification passes through the treatment area of the wheel, the moisture vapor in the wet air is adsorbed by the active silica in the wheel, while the dried air is transported to the space needing treatment by the processing fan. The wheel, which rotates slowly and continuously, carries the approaching-saturation moisture vapor into the regeneration area. Hot air吹入再生区 reversely, causing the adsorbed moisture in the wheel to desorb, which is then exhausted outdoors by the fan, thereby restoring the wheel's moisture adsorption capability and completing the regeneration process.
Utilizing imported honeycomb-shaped silicone desiccant rotors, these are formed into a cylindrical disc with a desiccant and regeneration zone enclosed within a ceramic silicone crystal-constructed box. Air to be dehumidified passes through the desiccant zone, where the rotor absorbs moisture from the air, resulting in dry air. After absorbing moisture, the desiccant zone rotates to the regeneration zone, where heated air carries the moisture out of the rotor and expels it outdoors. Once the moisture is released, the rotor rotates back to the desiccant zone, where the process of dehumidification and regeneration is continuously repeated, providing a stable supply of dry air.
