Product Specifications
Brand: YingTeng
Model: YTZL700M
Test Conditions: 20°C, 60%
Dehumidification capacity: 3.8 kg/h
Airflow/Excess Pressure: 700/150 PA m³/h
Regenerated Airflow/Excess Pressure: 230/80 PA m³/h
Operating Power / Current: 8kW / 12.2A
Voltage/Frequency: 380V/50Hz
Regeneration Heating Method: Electric Heating PTC
Frame Material: Cold Rolled Steel / Stainless Steel
Electrical Shock Protection Type: Type I
Waterproof Rating: IPX3
Initial efficiency G4 air filter treatment
Regenerated Air Filter: Initial Efficiency G4
Control Method: LCD + Buttons
Length: 1100mm
Width: 613mm
702mm
Handle intake: Φ200mm
Handle exhaust: Φ200mm
Regenerated inlet: Φ125mm
Regenerated Airflow: Φ125mm
Manufacturer: Henan Tongteng Explosion-Proof Electrical Appliances Co., Ltd.
Note: The above technical specifications are for reference only; the actual product is the standard.
Product Features
Sweden Proflute
The core turbine features the top-tier Swedish brand Proflute, offering an exceptional lifespan with 10 years of continuous operation without any failure, maintaining consistent dehumidifying performance.
SCR
Utilizing SCR energy-saving constant temperature control technology, it effectively ensures the stability of the heating system, allowing for worry-free long-term operation.
Low dew point dehumidification operation
Even in extreme conditions where traditional condensation dehumidification methods fail due to very low dew points, our solution ensures efficient dehumidification with an extended dehumidification range.
PTC
Regeneration heating utilizes the latest German PTC thermistor, reducing the PTC's thermal radiation hazard distance. In addition to maintaining the typical characteristics and advantages of PTC thermistor heating, it also improves the regeneration heating efficiency by 10% to 15%, demonstrating significant energy-saving effects.
Stall Protection Mode, for Added Peace of Mind
The desiccant wheel features a shutdown protection function, which effectively monitors the wheel's operation to ensure the equipment runs smoothly.
Smart Control System, Precise Humidity Control
Set the target humidity value, and the intelligent control system will achieve automatic and precise humidity control to reach the target humidity.
The core component of the centrifugal dehumidifier is a honeycomb-shaped wheel, which is made of a special ceramic fiber carrier and composite activated silicone; the wheel is divided into two zones on each side by a custom-made sealing device: the treatment zone and the regeneration zone.
As humid air requiring dehumidification passes through the treatment area of the wheel, the moisture vapor in the wet air is adsorbed by the active silica in the wheel, while the dried air is blown to the space for treatment by the processing fan. The continuously slowly rotating wheel carries the approaching-saturation moisture vapor into the regeneration area. In the regeneration zone, hot air吹入 in reverse dislodges the adsorbed moisture from the wheel, which is then exhausted outdoors by the fan, restoring the wheel's moisture adsorption capability and completing the regeneration process.
Utilizing imported honeycomb silicone desiccant rotors, these are structured into a cylindrical disc with a honeycomb design. The desiccant and regeneration areas are formed within a ceramic silicone crystal, rotating within the housing. Air used for desiccation passes through the desiccant area, where it's absorbed by the rotor, resulting in dry air. After absorbing moisture, the desiccant area rotates to the regeneration zone, where heated air carries the moisture out of the rotor and expels it outdoors. Once the moisture is released in the regeneration zone, the rotor returns to the desiccant area to repeat the process. This continuous desiccation and regeneration ensure a stable supply of dry air.
