The YingTeng FP series fan coil units integrate advanced technologies from both domestic and international counterparts. In accordance with national standards, after numerous trials and tests, we have efficiently completed a series of technical design improvements, resulting in superior performance, wide applications, a complete range of products, high efficiency, and low noise. The series includes horizontal concealed, horizontal exposed, vertical concealed, vertical exposed, and cassette units. When paired with fresh air handling units, they are extensively used in low-noise environments such as hotels, hospitals, office spaces, high-end conference halls, and exhibition halls, making them an ideal terminal device for centralized air conditioning systems.
Product Specifications
Model: FP170 (WM)
Brand: YingTeng
Airflow (m³): 1700
Cooling Capacity (W): 9000
Heat (W): 13,500
Noise dB(A): ≤48
Cold Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
Inlet and outlet pipes: ZG 3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 1680 x 500 x 250
Note: The data in the table is the measured value under the test conditions specified by the national standard for "Fan Coil Units" (GB/T19232-2003).
1. Supply cooling operating parameters: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.
Cold water intake temperature: 7°C, outlet temperature: 12°C.
Heating operating parameters:进口 air dry bulb temperature DB = 21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at 1 meter above and below the front of the unit in an anechoic chamber.
3. Standard configuration of the vertical concealed unit features an outdoor static pressure of 12 Pa.
4. Water resistance refers to the resistance at the rated flow rate; input power refers to the input power at high airflow.
5. When selecting a combination cold and hot dual coil unit, refer to the main technical parameters in the table above. One row of heat is approximately 40% of three rows of heat, low static...
The air volume loss of the press machine is approximately 10%, and the static pressure loss of the high-pressure unit is about 20%.
Product Features
Available in horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, wall-mounted, and more series.
Low overall height, saving construction space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.
The overall mold-formed drip pan, with insulation using the integral pressing and bonding technique, ensures no condensation worries.
Equipped with exhaust and draining functions, ensuring adequate heat exchange and preventing pipe cracking due to freezing.
The cooler is made by mechanical bending of copper tubes and high-efficiency aluminum fins.
The unit features an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precision design allows for the left and right configurations to be selected at will for ordering. Upon customer request, an automatic temperature control unit can be provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed-phase capacitor motor, equipped with imported high-precision ball bearings that are self-lubricating. The motor shafts are heat-treated and treated with hard chrome for durability, with ease of disassembly at the fixed points. The motor leads are protected by metal hoses, conforming to international standards.
Standard coil outlet static pressure is 0~12Pa, pressure retaining outlet static pressure is 30Pa (or ≤50Pa), with the code H.
The water pan and insulation are made by molding, featuring an overall adhesive process for durability without weld marks, with an aesthetically pleasing and lightweight design, no condensation, and no dripping; the exposed pipe fittings are made from sheet metal produced by Shanghai Baosteel, with a spray-painted surface, while the concealed pipe fittings are made from galvanized steel or fingerprint-resistant steel.
The coiled tube material is made by hydraulic or mechanical expansion of seamless copper tubes with corrugated aluminum fins. The coil box is lined with sound-absorbing and insulating materials, featuring a copper tube arrangement with high thermal conductivity and extremely low air resistance.
