The Yinteng FP series fan coil units have absorbed the advanced features of similar products from both domestic and international markets. Based on national standards and after numerous trials and measurements, they have efficiently completed a series of technical design improvements. Consequently, they offer superior performance, wide applications, a complete range of types, high efficiency, and low noise. The series includes horizontal concealed, horizontal exposed, vertical concealed, vertical exposed, and card-mounted units. When paired with fresh air handling units, they are widely used in hotels, hospitals, office spaces, high-end conference halls, and exhibition halls, where low noise is a priority. They are the ideal terminal units for centralized air conditioning systems.
Product Specifications
Model: FP204 (LG)
Brand: YingTeng
Airflow (m³): 2040
Cooling Capacity (W): 10800
Heat (W): 16,200
Noise db(A): ≤50
Cold Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
In and Out Pipe: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 600 x 355 x 1910
Note: The data in the table is the measured value under the test conditions specified by the national standard "Fan Coil Unit" (GB/T19232-2003).
Supply Cold Condition Parameters: Inlet Dry Bulb Temperature DB=27℃, Wet Bulb Temperature WB=19.5℃
Cold water inlet temperature: 7℃, outlet temperature: 12℃.
Heating operating parameters:进口 air dry bulb temperature DB = 21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at 1 meter in front and above/below the equipment in an anechoic chamber.
3. Standard configuration of the vertical concealed unit features an outdoor static pressure of 12 Pa.
4. Water resistance refers to the water resistance at the rated flow rate; input power refers to the input power at high airflow.
5. When selecting a combination cold and hot twin-coil unit, refer to the main technical parameters in the table above. One row of heat is approximately 40% of three rows of heat, low static...
The air volume loss of the press unit is approximately 10%, and the static pressure loss of the high static pressure unit is about 20%.
Product Features
Vertical and horizontal surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, wall-mounted, and more series available.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for variable airflow, meeting various application requirements.
The entire unit is made of hot-dip galvanized sheet, copper tubes, and aluminum fins, offering strong corrosion resistance.
The drip pan is formed by one-piece molding, and the insulation uses an integral pressure bonding process, eliminating concerns of condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The condenser is made of copper tubes and high-efficiency aluminum fins, processed through mechanical bending.
The unit employs an efficient aluminum finned heat exchanger with a low-noise fan configuration, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precision design allows for the left and right configurations of the coils to be selected at will for ordering. If required by the customer, an automatic temperature control unit can be provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all heat-treated and chrome-plated for durability, with easy disassembly at the fixed points. The motor leads are protected with metal hoses, conforming to international standards.
The standard coil outlet has a static pressure of 0~12Pa, while the remaining pressure outlet has a static pressure of 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an overall adhesive bonding process, ensuring sturdy and durable construction with no weld marks. The design is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed pipe fittings are made from plates produced by Shanghai Baosteel, with a spray-painted surface, while the concealed pipe fittings are made from galvanized steel or fingerprint-resistant steel.
The coiled tube material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and extremely low air resistance.
