Product Specifications
BHX-150GX Explosion-Proof Oven
Model: BHX-150GX
Brand: YingTeng
Internal Dimension (mm): Width x Height x Depth: 500 x 600 x 500
Dimensions (mm): Width x Height x Depth: 860×1450×760
Flameproof rating Ex II A/IIB: T1-T4
Voltage (V): 380V/50Hz
Power (kW): 6
Temperature Range (℃): RT ~ 260℃
Temperature Control Precision (℃): ±1℃
Volume (L): 150
Heat Source (Optional): Electric/Gas/Fuel/Oil Heating
Ex d IIB T4 Ga/Ex d IIB CT4 Ga
Manufacturer: Henan Tongteng Explosion-proof Electrical Appliances Co., Ltd.
Note: The above technical specifications are for reference only; the actual unit shall be the standard.
YingTeng explosion-proof oven explosion-proof marking: xdibmbIIBT4Gb/ExdibmbIICT4Gb
The explosion-proof oven series products comply with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 'd'"
GB/T 3836.4-2021 "Explosive Atmospheres - Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by 'm' type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
Explosion-proof ovens can operate normally under the following environmental conditions:
a) Altitude not exceeding 2000m;
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are explosive hazardous areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, T1 to T4.
The "YingTeng" explosion-proof drying oven series has been processed with special explosion-proof technology, making it suitable for use in flammable and explosive areas in Zones 1 and 2. It is widely applicable in scientific research, oil, chemical, pharmaceutical, and power plant environments where II A, II B, T1-T4 groups of combustible gases, steam, and air mixtures may form explosive hazards. The YingTeng explosion-proof oven has been inspected and certified by the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Products, receiving both explosion-proof and CCC certification. The oven features an aesthetically pleasing design, reasonable structure, and easy installation and maintenance. (Customizable options include explosion-proof refrigerators and freezers, stainless steel explosion-proof refrigerators, explosion-proof coolers, top-hinged explosion-proof refrigerators, side-hinged explosion-proof refrigerators, and low-temperature freezing type explosion-proof refrigerators, etc.)
Explosion-proof ovens are ideal for factories and research institutions for drying organic materials, preventing explosions, heat treatment, sterilization, and heating. They are the primary equipment for maintaining temperature and removing moisture. Widely used in plastic hardening, curing, varnished copper wire, drying of motor rotors, low-temperature tempering, annealing, aging treatment, and heat treatment processes. Not only do they ensure the quality of the workpiece treatment, but they also guarantee safe production. The working temperature of this oven can be adjusted from room temperature of 10 degrees Celsius to the highest temperature of 300 degrees Celsius, allowing for any temperature within this range to be selected. Once the temperature is stabilized, the electrical control system can automatically control the temperature.
Features of Explosion-Proof Oven
The lid closure tension is adjustable, featuring an integrally molded silicone door seal ring to ensure high vacuum inside the box.
High-performance CPU processing chips and highly sensitive, high-precision platinum resistance temperature sensors provide a more precise temperature control system, making operation more convenient.
Equipped with sensor fault alarm, over-temperature alarm, self-diagnostic dynamic control, temperature display calibration, parameter memory, and a timing function of up to 9999 minutes.
Independent temperature control and alarm system, automatically shuts down operation when exceeding the set temperature, with dual safety measures.
Add inert gas port and flowmeter.
