Product Specifications
BHX-1400GX Explosion-Proof Oven
Model: BHX-1400GX
Brand: YingTeng
Interior size (mm) - Width x Height x Depth: 1200 x 1200 x 1000
Dimensions (mm): Width x Height x Depth: 1860 x 2050 x 1260
Flameproof rating ExIIA/IIB: T1-T4
Voltage (V): 380V/50Hz
Power (kW): 15
Temperature Range (℃): RT ~ 260℃
Temperature Control Accuracy (℃): ±1℃
Volume (L): 1400
Heat Source (optional): Electric/Gas/Fuel/Oil
Explosion-proof marking: Ex d IIB T4 Gb / Ex d IIB C T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only; the actual product is the standard.
YingTeng explosion-proof oven, explosion-proof mark: xdibmbIIBT4Gb/ExdibmbIICT4Gb
The explosion-proof oven series complies with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment - General Requirements"
GB/T 3836.2 - 2021 "Explosive Atmospheres *Part 2: Equipment protected by intrinsic safety "d""
GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres Part 15: Design, Selection, and Installation of Electrical Equipment"
Explosion-proof ovens can operate normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors from Groups II A, II B, and T1 to T4, with air.
The "Yingteng" explosion-proof oven series models have been processed with special explosion-proof technology and are widely applicable to flammable and explosive areas in Zones 1 and 2. They are suitable for scientific research, oil, chemicals, medicine, power plants, and other locations where IIA, IIB class T1 to T4 groups of combustible gases, steam, and air mixtures pose explosion hazards. Yingteng explosion-proof ovens have passed inspection by the National Supervision and Inspection Center for Quality of Explosion-Proof Electrical Products and have received explosion-proof certification and explosion-proof CCC certificate; they feature an aesthetically pleasing design, reasonable construction, and easy installation and maintenance (available for customization: refrigerated and frozen explosion-proof refrigerators, stainless steel explosion-proof refrigerators, explosion-proof coolers, top-opening explosion-proof refrigerators, bottom-opening explosion-proof refrigerators, side-opening explosion-proof refrigerators, etc.).
Explosion-proof ovens are essential equipment for factories and research institutions, used for drying organic materials, preventing explosions, heat treatment, sterilization, and heating to retain temperature and exclude moisture. They are widely employed in the hardening, curing, varnishing, drying of motor rotors, and low-temperature tempering, annealing, aging treatment, and heat fitting processes for metal workpieces. Not only do they ensure the quality of the workpiece treatment, but they also guarantee safe production. The working temperature of the oven can be adjusted from room temperature of 10 degrees to the highest of 300 degrees, allowing for any desired temperature within this range. Once the temperature is stabilized, the electrical control system can automatically regulate the temperature.
Explosion-proof Oven Product Features
The lid can be adjusted for tightness, featuring an integral silicone door seal ring, ensuring high vacuum inside the box.
A high-performance CPU processing chip and a highly sensitive, high-precision platinum resistance sensor-based temperature control system ensure precise temperature regulation and easy operation.
Equipped with sensor failure alarm, over-temperature alarm, self-diagnostic dynamic control, temperature display calibration, parameter memory, and a timer function lasting up to 9999 minutes.
Independent temperature control and alarm system; automatically shuts down operation upon exceeding the set temperature; dual safety assurance.
Add inert gas port and flowmeter.
