Operation Precautions for Road Sweeping Vehicles:

Before cleaning, directly start the power switch with the key, and the kill switch is located on the right lower side of the seat.

②Engage the forward gear, accelerate, and the vehicle will move forward.

③Operate the handle, the sweeping brush begins to rotate, slowly lower the large arm, and start working.

④After confirming the container is full, drive the vehicle to an unused area, lift the arm, and use the handle to unload the material.

⑤Adjust the brush height according to the wear of the sweeping brush.

⑥ The rear fan and sweeping brush should be used separately; the air outlet can be adjusted for height up and down.

After completing the task, please turn off the power key! !!

Street Sweeper Operation:

The two control rods on the left side of the steering wheel are for walking control. The outer rod, pushed forward for low gear and pulled back for high gear, while the inner rod, pushed forward for forward gear and pulled back for reverse gear. The pedal on the right side of the steering wheel is the accelerator pedal, and the one on the left is the brake pedal.