I. Product Introduction
The gantry crane is a variation of the bridge crane, also known as a gantry. Its metal structure resembles a gate frame, supporting two legs under the main beam, allowing it to move directly on ground tracks. The ends of the main beam can feature cantilever beams, which can be designed as single-end cantilever, double-end cantilever, or beamless structures, depending on actual usage requirements.
The L-type single girder overhead crane is a cost-effective overhead crane designed for medium and light lifting capacities and spans. It is suitable for indoor and outdoor environments without support beams. It boasts good leg crossing, short production cycle, high site utilization, wide operational range, broad adaptability, and strong versatility, making it widely used in ports and cargo yards.
Common L-shaped single girder overhead cranes are divided into two types based on the different lifting mechanisms:
1. The ML type electric overhead crane with an electric hoist as the lifting mechanism has a lifting capacity of 5-16 tons, a span of 7.5-50 meters, and an operating grade of A3.

 
2. The MDG type general-purpose overhead crane with a winch system as the lifting mechanism has a lifting capacity of 5-50 tons, a span of 7.5-50 meters, and a working class up to A5 or A6.

 
Part Two: Product Overview Images

ML Type Electric Hoist Gantry Crane

MDG Type General Door Crane (Single Girder Hoist Type)

Our companyOur single girder overhead cranes, produced with innovative design, attractive appearance, high cost-performance ratio, safety, reliability, superior performance, and efficient operation, can meet various working conditions.

 
       Customized non-standard crane models available to meet customer requirements, specializing in general single and double girder cranes, bridge and gantry cranes, metallurgical cranes, explosion-proof cranes, European-style cranes, clean cranes, intelligent fully automatic grab cranes, container gantry cranes, and offering services including design, research and development, manufacturing, sales, modification, installation, and maintenance.