Microcomputer Grey Melting Point Determinator
Model: BYHRD-5A
The Microcomputer Grey Melting Point Tester utilizes a microcomputer to automatically control the process of determining the melting properties of ash. The camera captures the ash cone image, which is then displayed at a designated location on the computer monitor through image processing technology. The furnace temperature is regulated and controlled by a front-end single-chip microcomputer using PID control, and the temperature is transmitted to the microcomputer system via a serial port, displaying a time-temperature image. At the end of the test, you can choose to print the ash cone result image and corresponding temperature data, or save the result file. The test process image and temperature are automatically saved and cleared when the next test begins. This instrument is widely applicable in industries such as electricity, coal, cement, and metallurgy, and currently holds a leading position in technology domestically.
Key Features:
1.1 Microcomputer automatic temperature rise control, with temperature rise characteristics compliant with national standard GB219-96.
1.2 The gray cone image is displayed in the image acquisition area of the microcomputer monitor.
1.3 The system features storage and retrieval capabilities for test results.
1.4 Selectable to print gray melting point image and temperature value.
1.5 Automatically stores and displays the entire experimental process, showing the temperature-rise-time curve; the furnace can be freely rotated for easy sampling and removal.
The system operates on WINDOWS 98 or later operating systems.
1.7 Automatic Judgment Function: Deformation Temperature (DT), Softening Temperature (ST), Hemisphere Temperature (HT), Flow Temperature (FT).
Specs and Technical Parameters:
2.1 High-Temperature Furnace: Horizontal Furnace
2.2 Heating Element: Silicon Carbide Tube
2.3 Heating Power Supply: 220V±10% 50Hz
2.4 Maximum heating current: 30A
2.5 Maximum heating temperature: 1600°C
2.6 Temperature Sensor: Platinum Rhodium-Platinum Thermocouple
2.7 Temperature Control Method: Automatic Adjustment Control
2.8 Heating Rate: 900～1500℃ ±1℃/min
