ProductName:Indium-Gallium-Tin intermediate alloyCu RE alloy |
FactoryHomeChangsha Wan特 New Materials Co., Ltd. |
SexCondition:Liquid Metal |
Liquid metal technology features a unique non-crystalline molecular structure in its liquid metal alloy materials, starkly different from the crystalline structure of traditional metals. Beyond its characteristic of low melting point (hence the name liquid metal), its advantage lies in its ability to be shaped after melting. Due to the physical properties of its solidification process that are completely different from those of ordinary metals, its casting process is more similar to plastic than metal, allowing for easier creation of various product shapes.
In addition to the convenience of casting, other characteristics of liquid metal include:
High yield strength
2. High hardness
3. Superior strength-to-weight ratio
4、chaoHigh elasticity limit
5. Corrosion-resistant
6. High-wear resistance
7. Unique Acoustic Properties
Gallium-based alloy in liquid state at room temperature
Relevant technical specifications
Product Name | Thermal Conductivity | Resistivity | Dynamic Viscosity | Dynamic Viscosity | Surface Tension |
Gallium-based Alloys | 28W/M.K | 2.96x10-6Ω.m | 6.96×10-8m2/S | 0.448Pa.S | 0.563N/m |
I
Category Type | Please provide the Chinese content you would like translated into American English.Copy | Liquidus Line°C） | Solid Phase Line°C） | Density(g/cm3) | |
1 | GalliumIndium-Tin-Zinc | 7.6 | 6.5 | 6.5 | |
2 | Low-melting point alloy | GalliumIndium-Tin | 10.7 | 10.7 | 6.5 |
3 | Low-melting-point alloy | GalliumIndium | 15.7 | 15.7 | 6.35 |
4 | GalliumIndium | 25 | 15.7 | 6.15 | |
5 | Pure Metal | Gallium | 29.78 | 29.78 | 5.904 |
Excellent electrical and thermal conductivity
Alloys that are in a liquid state at room temperature exhibit a high thermal conductivity coefficient, far exceeding that of non-metallic liquids. Therefore, these materials are used for thermal conductivity andOr used for heat dissipation. Other advantages of these liquid alloys include high density and high conductivity.
Wettability on metallic and non-metallic surfaces
By thoroughly removing the oxide layer from the substrate surface, these alloys can wet most metal surfaces. However, for certain metals, even at room temperature, bismuth is very unreactive. At high temperatures, bismuth can dissolve most metals, but some metals, includingNa, K, Au, Mg, Pb, Ni, especially Hg, can slightly dissolve in bismuth at moderate temperatures.
As previously mentioned, molybdenum is corrosive to all metals except for rhodium and palladium. Rhodium and palladium have excellent corrosion resistance. Nickel, titanium, and molybdenum also exhibit corrosion resistance, but not as strong as rhodium and palladium.2. Tungsten and tungsten alloys, like molybdenum, can wet many non-metallic surfaces, such as glass and quartz. Gently wiping tungsten alloys onto these non-metallic surfaces promotes better wetting.
Note: These alloys will form a thin, dull oxide layer on the surface, which can easily expand with a slight shake. The unoxidized surface is bright and shiny.
HintGallium-based alloys exhibit corrosive properties to aluminum and its alloys (but corrosion can be prevented through anodizing treatment).
Utilize
Typical applications for these materials include thermostats, switches, barometers, heat transfer systems, as well as cooling and heating systems. A unique feature is their ability to conduct heat and electricity between non-metal and metal surfaces.
Packaging
Alloys are packaged in polyethylene bottles and shipped in accordance with relevant regulations.
Storage and Shelf Life
Unopened, the shelf life is one year. When the alloy is removed from the packaging bottle, it is recommended to fill the bottle with dry argon gas. If the alloy has already solidified below its melting point during storage, it should be remelted, shaken thoroughly, and then used. Exercise caution when heating the alloy in its original packaging bottle. The temperature should not exceed65 degrees.
