Product Introduction:

1. The XD type scroll vacuum pumps are all single-stage oil-sealed scroll vacuum pumps, which are the basic equipment for achieving vacuum. The working principle is shown in Figure 1.

2. The XD type scroll vacuum pump has a coarse filter with a metal wire mesh at the suction port to prevent solid foreign dust particles from entering the pump cavity. An exhaust transition with high-efficiency oil-gas separation is installed inside the oil separator. When the pump is stopped, an intake valve integrated in the suction port isolates the pump from the evacuated system, preventing pump oil from flowing back into the system. The pump is air-cooled. All pumps are driven by directly coupled motors through flexible couplings.

Application Scope:

The XD type scroll vacuum pump is suitable for vacuum extraction in sealed systems, such as vacuum packaging, vacuum forming, and vacuum suction.

2. Inlet Pressure Range: 100 Pa to 100,000 Pa; oil mist may be produced at the exhaust port of the vacuum pump if it operates outside this range. The operating environment temperature and intake gas temperature for the XD-type scroll vacuum pump should be between 5°C and 40°C.

3. The XD type scroll vacuum pump cannot remove water or other liquids. It is not suitable for removing explosive, flammable, highly oxygenated, or corrosive gases.

4. Standard motors supplied are non-explosion proof. For explosion-proof or other special requirements, the motors must comply with relevant standards.