Main Technical Parameters of the Equipment
1. Axial magnetic flux density: AC: 0~16000AT RMS
2. Vertical Magnetic Flux: AC: 0～16000AT RMS.
3. Compound magnetization magnetic potential: Axial: 0-16000A continuous adjustable, with power-off phase control; Radial: 0-16000AT continuous adjustable, with power-off phase control.
4. Sensitivity: Clear longitudinal magnetic streaks on the 15/50A type test strip are clearly visible.
5. Demagnetizing Magnetizing Force: Continuous attenuation from 16000AT to 0.
7. Demagnetization Effect: Residual magnetic flux on workpiece surface ≤ 0.3mT (3Gs)
10. Magnetic Powder Selection: Apply 400 mesh fluorescent magnetic suspension liquid to the workpiece surface with a concentration of 10-25g/L; Equipment Configuration and Composition 1. Welded steel frame and sheet metal forming machine 1 set 2. Magnetizing main circuit 2 sets 3. Circumferential magnetizing device 2 sets 4. Longitudinal magnetizing device 2 sets 5. Magnetic suspension liquid spray recycling system (made of S304 stainless steel) 1 set 6. Magnetic suspension liquid tank and mixing system (made of S304 stainless steel) 1 set 7. Omron PLC and electrical control system 1 set 8. KCZ2C-3 magnetizing trigger system; 2 sets 9. Fluorescent lighting 1 set 10. Synthetic leather fluorescence darkroom 1 set
11. Handheld Spray Gun  1 pc
12. Digital Meters - 2 Sets
13. Touch Screen - 1 Set
14. Conveyer line 1 set
Magnetic Demagnetization System - 2 Sets