Slag Grinding EquipmentA novel mechanical equipment commonly used in the industry for treating slag, featuring high powder grinding efficiency, large drying capacity, easily adjustable product fineness, low noise, low power consumption, simple process flow, low wear, and cost-effective operation, which is highly favored by a wide range of customers!
Process Introduction
Material falls to the center of the mill disc through the discharging pipe. The disc, rotating at a constant speed, disperses and flattens the raw material uniformly outward due to the force of centrifugal action, forming a bed of a certain thickness. The material is simultaneously crushed by multiple roller mills on the disc. Under the continuous drive of centrifugal force, the material moves outward towards the edge of the mill disc. When the material leaving the disc encounters the hot gas entering the mill through the wind ring and rises with it, it passes through the middle shell of the mill into the classifier. During this process, the material undergoes a thorough heat exchange with the hot gas, causing the moisture to evaporate rapidly.
The classifier controls the finished particle size at the roller mill outlet, with particles larger than the specified size being separated and falling back onto the grinding disc, while material meeting the fineness requirements passes through the classifier into the finished product storage.
Why Choose Xinxiang Great WallWhat about the GRMS slag vertical mill? Here are a few reasons to tell you:
1. Adjust fineness freely according to requirements
New high-efficiency cage rotor classifier, ensuring finished product specific surface area can beFlexible adjustment within the range of 400~550㎡/kg to meet various fineness requirements of customers;
2. Single-unit energy consumption does not exceed 30 KWh
Horizontal grinding disc and conical grinding roller are used to ensure a stable material bed, with low energy consumption and energy savings compared to ball mill systems.30%～40%;
3. Significant energy-saving and environmental protection, easy to maintain
The system operates under negative pressure, ensuring no dust overflow and a clean environment, meeting national environmental protection standards.; Inspecting and repairing hydraulic cylinders, reversing the swing arm, and replacing roller bushes and liners is quick and convenient, reducing downtime losses.
4. Large revenue from metal recovery from tons of ore powder
Specially designed de-ironing equipment achieves high iron scrap recovery rates.0.2-0.3% metal yield per ton of slag production, offering a higher metal revenue; and it also avoids the "enrichment" of metals, reducing the consumption of fragile parts and lowering maintenance costs.
Is that not enough?
Original parts, minimize post-maintenance concerns
All spares such as roller grinding units and swing arms within the entire system are self-manufactured by Xiangxin Great Wall Machinery, ensuring original production quality. This significantly alleviates the issue of clients struggling to find spare parts later on!
