National supply of hydrogen gas alarm detectors
RBT-6000-ZLTypeHydrogen GasGas detectors are designed as perGB15322.1-2003Industrial-grade combustible gas (hydrogen) safety detection equipment designed.
LEDStatus indicator lights are provided, allowing for online zeroing and calibration via the host. Two-wire, non-polar power supply and signal transmission, easy installation, and cost-effective cabling.
1Measurement Accuracy
The sensors utilize imported gas-sensitive elements, offering high precision, minimal zero-point drift, and excellent resistance to poisoning.
2 Explosion-proof design
Suitable for factory conditions1、2Keep away from hazardous areas.
3Easy to repair
Sensor features digital module design, requiring no zeroing or calibration during on-site replacement.
4 Sound and Light Alarm (Optional)
Available for connectionRAS-6000Type explosion-proof sound and light alarm lamp, for on-site sound and light alarm.
Technical Specifications
Electrical
1 Power Supply:DC36V±15%
2 Maximum Power: ＜1W
3 Contact Methods:M-BUS Bus
4 Signal Output: A set of passive normally open signals
5Cable Connectors:RVS 2×2.5mm2
6 Resolution:1%LEL
7Principle of Detection: Catalytic Combustion
8 Response Time: Catalytic CombustionT90＜30s
Certification
1 Tianjin:Exd II C T6 Gb
2 Ministry of Public Security: Fire Product Qualification Assessment Center
3 Application Standards:GB15322.1-2003
Environment
1 IPGrade:IP65
2 Humidity Range:10%RH～95%RH
3 Pressure Range:86Kpa～106Kpa
4 Storage Temperature:-25℃～55℃
Product Installation
1 Material: Cast Aluminum
2 Explosion-proof threaded connection:G3/4" Internal Thread
3 Dimensions:172mm×138mm×77mm
4 Weight:1.3㎏
5 Installation Methods: Wall-mounted, Clamp-on, Pipe-through
6 The diameter of the mounting hole is:Φ8mm
7 Ensure the sensor is mounted facing down during installation of the detector.
8 After proper wiring, the outer cover of the detector should be securely fastened to meet explosion-proof requirements.
After-sales:1Annual warranty, lifetime maintenance.
