Single-Head Suspended Chisel Machine, Concrete Chisel Machine, Indoor Roughening Frame Chisel Machine

Sales Phone: 189-0537-7135, Manager Li

What is Deburring:
Chipping is the process of creating grooves on the finished concrete surface, typically performed after the casting of in-situ slabs to ensure a strong bond for the subsequent casting of columns and walls.
In simple terms, it involves roughening the concrete surface with a drill and then thoroughly washing it, primarily to enhance the bonding strength between the concrete and its components.
Section II: The Function of Deburring
The reason for chiseling is not only to roughen the surface, but primarily to remove the froth on the concrete surface, ensuring a dense and firm bond at the junction of new and old concrete. To illustrate with a bridge...
1. Piers with broken pile heads or roughened surfaces, which can also be considered as chiseling, are designed to remove loose concrete to ensure quality:
The roughening at the joint of the two columns is to ensure a solid concrete bond, which also serves to eliminate the seam.
The top surface of the 3-beam plate is roughened to ensure a strong bond with the paving layer, as the paving layer is relatively thin and not roughening it could lead to peeling.

Section 3: Application Scope:
Concrete products exterior surface roughening at construction joints for precast beams, rebar modeling, and roughening the joint edges and varying heights.
Increase adhesion by cleaning the coating; specific application scope can be inquired with customer service in advance.